Event Messages In The Log Book; Log Book Entry - Detailed View - ProMinent DULCO flex Control Operating Instructions Manual

Troubleshooting
16.3.3

Event messages in the log book

Tab. 22: Events
Log book no. Description
0 Head installation changed
1 Parameter menu called up – dongle was inserted.
2 -
3 -
4 -
5 -
6 -
7 The pump was reset to factory settings.
8 The pump was calibrated.
9
10
11 The
12 The pump hose was replaced.
13 The timer performed an action.
14 A relay has triggered.
15 -
16 CRC error has been detected in the EEProm data.
Log book: [hh ll 00 00]
hh – MSB address
ll – LSB address
[00 00 rr ss]
ss – Structure
rr – Result
17 -
18 The metering volume cannot be metered.
19 The pump has been booted and is operational.
20 -
21 The dosing direction was changed.
16.3.4

Log book entry - detailed view

94
[START/STOP] was pressed.
[Priming] was pressed.
[Clickwheel] was pressed.
For more information about a log book entry, press the
Tab. 23: Information on the detailed view
Line
1
2
3
Information
Date, time
Type of entry (fault, warning ...)
Total operating time, total revolutions
[Clickwheel] .