Mounting The Hmi User Control - ProMinent DULCO flex Control-DFYa Operating Instructions Manual

1
Fig. 10: DULCO flex Control - DFYa DFYa with roller dismantled and in hose change position
1 Front cover
2 Star-shaped screw, shown here with domed nut in a
locking function
3 Roller with roller bracket, dismantled
4 Pump hose

7.4 Mounting the HMI user control

19. Fit the front cover (1) and attach the 4 star-shaped screws (2) to the
dosing head (5). Screw the domed nut onto the 4th star screw again
and tighten it to provide a locking function.
20. Press the Clickwheel.
ð The
21. Press the
ð
22. Press the
ð
2 3 4 5
If ordered with the wall mounting, the HMI can be mounted directly on a
wall.
'Hose change interval' menu appears.
[Clickwheel] to reset the warning time.
'Reset interval now!' appears.
[Clickwheel] again to complete the 'hose change' menu.
'Complete!' and a hand symbol appear. This is a reminder that
the pump still needs to be stopped manually. If necessary, now
restart the pump using the
5 Dosing head
6 Bracket for hydraulic connector, 2-part, partially dis‐
mantled
7 Hydraulic connector, top
Assembly
[STOP/START] key.
6 7
P_DX_0082_SW
31