Error Messages - Acknowledging Error Messages - ProMinent gamma G/4b Operating Instructions Manual

Error message "Error Minimum"
Possible cause:
Error message "Error flow"
Possible cause:
Entire display flashes
Possible cause:
Entire display continues to flash:
Version 2.0
Operation (Basic Version)
Manual
If additionally the relay option "Fault annunciation relay de-energising"
was selected the relay de-energises to issue the alarm or energises for
"switching mode" energising. The word "Relay" appears in the display.
Error
Manual
• By simultaneously pressing the
function can be turned off.
• By removing the function plug from the socket (10) it is automatically
turned off.

12.3.8 Error messages - acknowledging error messages

PLEASE NOTE:
Watch flashing error message on display (4)!
Check whether the function plugs (11/12) are plugged in or
cable plug (10) is correctly connected!
Lack of chemical
Remedy: • The error message confirms itself by filling up the supply tank.
No or too little metering
Remedy: • Briefly pressing the
"Pause/Stop" (remote on/off)
System error
Remedy:
• Briefly pressing the
"Pause/Stop" (remote on/off)
• The pump must be sent back to the factory to be checked.
flow
Relais
flow
P
- and
P
key or executing the control function
P
key or executing the control function
key the monitoring
Page 59 of 88 pages