General Information About The Xbee/Xbee-Pro Digimesh 2.4 Rf Module; Key Features Of The Xbee/Xbee-Pro 2.4 Digimesh; Worldwide Acceptance Of The Xbee/Xbee-Pro 2.4 Digimesh - Digi XBee User Manual

Digimesh 2.4 rf modules
Hide thumbs Also See for XBee:
Table of Contents

Advertisement

®
XBee/XBee-PRO
DigiMesh 2.4 User Manual
General Information about the XBee/XBee-PRO
DigiMesh 2.4 RF Module
®
The XBee
and XBee-PRO
needs of low-cost, low-power wireless sensor networks. The modules require minimal power and
provide reliable delivery of data between remote devices. The modules operate within the SMT
2.4 MHz frequency band.
Key Features of the XBee/XBee-PRO 2.4
DigiMesh
The following table highlights the key features of the XBee DigiMesh 2.4 RF Module:
High performance, low cost
XBee
• Indoor/Urban: up to 100 ft. (30 m)
• Outdoor line-of-sight: up to 300 ft. (100
m)
• Transmit power output: 1 mW (0 dBm)
• Receiver sensitivity: -92 dBm
XBee-PRO
• Indoor/Urban: up to 300 ft (100 m)
• Outdoor line-of-sight: up to 1 mile (1500
m)
• Transmit power output: 100 mW (20 dBm)
EIRP
• Receiver sensitivity: -100 dBm
• RF data rate: 250 kbps
Advanced networking and security Easy to use
• Retries and acknowledgements
• Optional self-routing, self-healing mesh
networking available
• DSSS (Direct Sequencing Spread
Spectrum)

Worldwide Acceptance of the XBee/XBee-PRO 2.4 DigiMesh

Our XBee DigiMesh 2.4 RF modules meet the following standards:
• USA FCC approval (refer to Appendix B for FCC requirements)
• Systems that contain XBee-PRO
certifications.
• ISM (Industrial, scientific, and medical) 2.4 GHz frequency band
© 2014 Digi International Inc.
®
DigiMesh 2.4 RF Modules were engineered to support the unique
Low power
XBee
• TX peak current: 45mA (@ 3.3V)
• Power down current (cyclic sleep): <50 µA
• Power down current (pin sleep): <10 µA
XBee-PRO
• TX peak current: 250 mA (150 mA for
international variant)
• RX current: 55 mA (@ 3.3V)
• Power down current (cyclic sleep): <50 µA
• Power down current (pin sleep): <10 µA
• No configuration necessary for out of box
RF communications
• AT and API command modes for
configuring module
• Small form factor
®
DigiMesh 2.4 RF Modules inherit Digi
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xbee-pro

Table of Contents