Section 1 - Chilled Water System Optimizer - Enable Conditions - Carrier OPN-OPT-OL Installation And Startup Manual

Section 1 - Chilled Water System Optimizer - Enable conditions

Navigation: i-Vu®
Point Name/Description
1. CHWS Optimizer ON Switch: — Displays Disabled/Enabled status.
CAUTIONS

You must set this to DISABLED until the system is set up and ready to run.

The Main ON Switch in Section 1 - Optimizer - Primary Enable Conditions
(page 60) must also be enabled for the CHWS Optimizer to be enabled.
Chilled Water System Optimizer v2
Installation and Start-up Guide
Appendix B: The Chilled Water System Optimizer Commissioning view of the Properties page
Properties Control Program
>
Section 1 - Chilled Water System Optimizer - Enable Conditions
69
Chilled Water Temperature Optimizer Reset
>
Range
D: DISABLED
R: DISABLED/ENABLED
CARRIER CORPORATION ©2019
>
All rights reserved