Table of Contents
Advertisement
What is the Chilled Water System Optimizer?
The Chilled Water System Optimizer (Part# OPN-OPT-OL) provides precise chilled water and condenser water
setpoint optimization by carefully balancing the energy use of both the chilled water plant equipment and the
chilled water consumers. This results in an overall reduction in energy use and electrical demand.
You can select from the following protocols:
BACnet/IP
Modbus RTU or ASCII
Modbus/IP
CAUTION The Chilled Water System Optimizer does not support BACnet MS/TP or BACnet/ARC156
networks.
WARNING The Chilled Water System Optimizer must not be used as a router. This function is not supported.
Chilled Water System Optimizer v2
Installation and Start-up Guide
1
CARRIER CORPORATION ©2019
All rights reserved
Advertisement
Table of Contents
