Table of Contents
Advertisement
Section 1 - Condenser Water System Optimizer - Enable Conditions
Navigation:
i-Vu®
Point Name/Description
1. CWS Optimizer ON Switch: — Select ENABLED or DISABLED.
Section 2 - Manual Overrides of Condenser Water Reset - and other
Settings
Navigation:
i-Vu®
Point Name/Description
Manual Pause & Hold of Condenser Water Reset
Pause & Hold is __ — Displays OFF or ON status.
Manual Quick Warm Up of Condenser Water Supply
Quick Warm Up is: — Displays OFF or ON status.
Section 3 - Condenser Water Setpoint Reset - Output & Limit Settings
Navigation:
i-Vu®
Point Name/Description
Current Limits, Approach, Setpoints, and CWS Temperature Setpoint
Current High Limit is: — Displays value.
Current High Approach is: — Displays value.
Current Setpoint is: — Displays value.
Current Low Approach is: — Displays value.
Current Low Limit is: — Displays value.
Chilled Water System Optimizer v2
Installation and Start-up Guide
Appendix A: The Chilled Water System Optimizer — Status only view of the Properties page
Properties
Control Program
>
Section 1 - Condenser Water System Optimizer - Enable Conditions
>
Properties
Control Program
>
Section 2 - Manual Overrides of Condenser Water Reset - and other Settings
>
Properties
Control Program
>
Section 3 - Condenser Water Setpoint Reset - Ouput & Limit Settings
55
Condenser Water Temperature Optimizer Reset
>
Condenser Water Temperature Optimizer Reset
>
Condenser Water Temperature Optimizer
>
CARRIER CORPORATION ©2019
>
All rights reserved
Advertisement
Table of Contents
