Status indicators
Environmental operating
range
Storage temperature range
Physical
Overall dimensions
Mounting dimensions
Depth
Weight
BACnet support
Listed by
Chiller system configurations
The program is scalable, so it can be applied from a minimal system including only the chiller and chilled water
pump components, to a larger system, including condenser water side components and air handling unit fans, as
illustrated below.
Chilled Water System Optimizer v2
Installation and Start-up Guide
LED status indicators for Port S1 and S2 communication, Ethernet Port E1
communication, and low battery status. Seven segment status display for running,
error, power status, archive valid, and brownout.
-20 to 140°F (-29 to 60°C), 10–90% relative humidity, non-condensing
-24 to 140°F (-30 to 60°C), 0 to 90% relative humidity, non-condensing
Rugged aluminum cover, removable screw-type terminal blocks
A:
7-1/2 in. (19.1 cm)
B:
11-5/16 in. (28.7 cm)
C:
5 in. (12.7 cm)
D:
10-7/8 in. (27.6 cm)
E:
1-1/4 in. (3.2 cm)
F:
1/4 in. (.6 cm)
Mount with 6-32 by 1/2 in. mounting screws
1-1/4 in. (3.2 cm)
1.4 lbs (0.64 kg)
Conforms to the BACnet Building Controller (B-BC) Standard Device Profile as
defined in ANSI/ASHRAE Standard 135-2012 (BACnet) Annex L, Protocol Revision
9
UL916 (Canadian Std C22.2 No. 205-M1983, CE, FCC Part 15 - Subpart B - Class A
3
What is the Chilled Water System Optimizer?
CARRIER CORPORATION ©2019
All rights reserved