WS (Sticky Warning Numbers)
Reports warning numbers of all warnings active since the last use of WS or WN, including any warnings
that are currently active. WS also resets all non-zero warning counts, except for warnings that are
presently active, which are set to 1.
Binary command
N/A
Command type
Diagnostics
Parameter range
(read-only): 1 - 8
Default
N/A
Bytes returned
1
MAC/PHY commands
The following AT commands are MAC/PHY commands.
AM (Auto-set MY)
Sets the MY (Source Address) parameter from the factory-set serial number of the device. The address
consists of bits 29, 28 and 13-0 of the serial number, in that order.
Sending AM displays the address.
Binary command
0x41 (65 decimal)
Command type
MAC/PHY
Parameter range
N/A
XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide
MAC/PHY commands
56