General Information; Proper Use; Specifications; Manufacturer's Address - Krone Swadro 1010 Operating Instructions Manual

1

General Information

The operating manual contains basic instructions to be
observed when attaching, operating and doing maintance
work. Therefore it is imperative that the operating
personnel have access to and read this operating manual
before putting into operation and using the implement.
Follow both the general safety instructions contained in
the section on safety and the specific safety instructions
contained in the other sections.

1.1 Proper Use

The rotary swather is used to swath cut hay.
It is installed inside the CAT II three-point hitch at the rear.

1.2 Specifications

1.2.1 Manufacturer's Address

Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Straße 10
D-48480 Spelle (Germany)
Telephone: (49) 0 59 77/935-0
Fax: (49) 0 59 77/935-339
E-mail: info.ldm@krone.de
General Information

1.2.2 Identification

The machine data are listed on the identification plate (1).
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10 D-48480 Spelle
Type
Vehicle
ID no.
Year
The entire identification plate re-
presents a legal document and should
not be altered or rendered illegible!
1.2.3 Data Required for Questions and
Orders
When making questions concerning the machine or
ordering replacement parts, be sure to provide type
designation, vehicle ID number and year of
manufacture.
We recommend that these details be entered in the
above boxes so that they are readily available.
Genuine replacement parts and
accessories authorized by the
manufacturer help ensure safety.
Use of other parts may void liability for
damage which results.
SW1
Made in
Germany
I - 1