Related Manuals for Krone Swadro TC 880
Summary of Contents for Krone Swadro TC 880
- Page 1 Rotary Swather Swadro TC 880 Swadro TC 880 X-treme (from serial no.: 892 357) Order no.: 150 000 296 01 en 07.07.2014...
- Page 2 Rotary rake KRONE Machine: Type / types: Swadro TC 880, Swadro TC 880 X-treme to which this declaration refers is in compliance with the relevant provisions of EC directive 2006/42/EC (machines). The signing Managing Director is authorised to compile the technical documents.
-
Page 3: Table Of Contents
Table of Contents Pos: 3 /Layout Module /Inhaltsverzeichnis @ 0\mod_1196861555655_78.docx @ 15165 @ 1 @ 1 Table of Contents Table of Contents ........................... 3 Foreword ..............................6 To this Document ........................... 7 Validity .............................. - Page 4 Table of Contents PTO shaft ............................31 8.6.1 Length adjustment........................31 Regulating direction of travel ......................32 Checking the Locking of the Transport Position ................33 Setting the Rotor Inclination ......................34 ...
- Page 5 Table of Contents 12.1 Adjustable throttles ........................... 72 Maintenance ............................73 13.1 Special Safety Instructions ....................... 73 13.2 Test run............................73 13.3 Maintenance table ..........................74 13.4 Tightening Torques ..........................
-
Page 6: Foreword
Pos: 5.2 /BA/Vorwort/Schwader/Verehrter Kunde Schwader @ 1\mod_1202129116819_78.docx @ 57456 @ @ 1 Dear Customer, By purchasing your rotary rake, you have acquired a quality product from KRONE. We are grateful for the confidence you have invested in us in buying this machine. -
Page 7: To This Document
Pos: 8 /BA/Einleitung/Gültigkeit/Schwader/Gültigkeit Swadro TC 880_TC 880 X-tr (2014-05-14 11:27:09) @ 218\mod_1390916537392_78.docx @ 1768849 @ 22 @ 1 Validity These operating instructions apply to rotary rakes of the series: Swadro TC 880, Swadro TC 880 X-treme Pos: 9 /BA/Zu diesem Dokument/Richtungsangaben @ 110\mod_1336024650492_78.docx @ 979274 @ 3 @ 1 3.1.1... -
Page 8: Safety
Safety Pos: 14.1 /Überschriften/Überschriften 1/P-T/Sicherheit @ 0\mod_1195566748646_78.docx @ 635 @ 1 @ 1 Safety Pos: 14.2 /Überschriften/Überschriften 2/U-Z/Verwendungszweck @ 1\mod_1201707246738_78.docx @ 54055 @ 2 @ 1 Purpose of Use Pos: 14.3 /BA/Einleitung/Schwader/Verwendungszweck Schwader KAT I und KAT II am Heck. @ 1\mod_1202129727897_78.docx @ 57517 @ @ 1 The rotary rake is used for swathing of cut crops. -
Page 9: Safety Instructions And Accident Prevention Regulations
Safety Pos: 14.7.5 /BA/Sicherheit/Sicherheits- und Unfallverhütungs-Vorschriften Swadro_Ladewagen_EasyCut @ 73\mod_1308298589597_78.docx @ 655493 @ @ 1 Safety Instructions and Accident Prevention Regulations Please follow all generally applicable safety and accident prevention regulations in addition to the safety instructions contained in these operating instructions! The attached warning and safety signs provide important information for safe operation. -
Page 10: Hitched Implements
Safety 26 Parts operated by external power (e.g. hydraulically) can cause crushing and shearing injuries! 27 Before leaving the tractor, lower the implement onto the ground, apply the parking brake, switch off the engine and remove the ignition key! Pos: 14.7.6 /BA/Sicherheit/Angehängte Geräte/Geräte angehängt @ 0\mod_1199699679381_78.docx @ 33245 @ 22 @ 1 Hitched Implements 1... -
Page 11: Pto Operation
Safety Pos: 14.7.8 /BA/Sicherheit/Zapfwellenbetrieb Traktor @ 0\mod_1199699899350_78.docx @ 33264 @ @ 1 PTO operation 1 Use only PTO shafts specified by the manufacturer! 2 The guard tube and guard cone of the PTO shaft and the PTO guard must be attached and in good working condition (on the implement side, too)! 3... -
Page 12: Hydraulic System
Safety Pos: 14.7.11 /BA/Sicherheit/Hydraulikanlage @ 2\mod_1203503691986_78.docx @ 66225 @ @ 1 Hydraulic system 1 The hydraulic system is pressurised! 2 When connecting hydraulic cylinders and motors, make sure the hydraulic hoses are connected as specified! 3 When connecting the hydraulic hoses to the tractor hydraulics, make sure that the hydraulics of both the tractor and the implement have been depressurized! 4... -
Page 13: Maintenance
Safety Pos: 14.7.15 /BA/Sicherheit/Wartung/Wartung Swadro TC 880 X-tr @ 242\mod_1395323043085_78.docx @ 1899505 @ @ 1 Maintenance 1 Always make certain that the drive and the engine are switched off before doing any repairs, maintenance or cleaning! - Remove the ignition key! 2... -
Page 14: Working In The Vicinity Of Power Transmission Lines
Safety Pos: 14.7.17 /BA/Sicherheit/Arbeiten im Bereich von Hochspannungsleitungen @ 11\mod_1223357468516_78.docx @ 145505 @ @ 1 Working in the vicinity of power transmission lines 1 Always take great care when working under or in the vicinity of power transmission lines. 2 Ensure that when in operation or being transported, the machine cannot exceed a total height of approx. -
Page 15: Machine Description
Machine Description Pos: 16.1 /Überschriften/Überschriften 1/K-O/Maschinenbeschreibung @ 107\mod_1334231806004_78.docx @ 965201 @ @ 1 Machine Description Pos: 16.2 /Überschriften/Überschriften 2/K-O/Maschinenübersicht @ 0\mod_1195565731130_78.docx @ 555 @ 11 @ 1 Machine overview Pos: 16.3 /BA/Einleitung/Maschinenübersicht/Schwader/Maschinenübersicht Swadro TC 880_TC 880 X-tr @ 220\mod_1391506326781_78.docx @ 1785445 @ 1 @ 1 SW9000027_1 Fig. -
Page 16: Identification Plate
Authentic KRONE spare parts and accessories authorised by the manufacturer help to ensure safety. The use of spare parts, accessories and other devices which are not manufactured, tested or approved by KRONE will result in the revoking of the liability for damages resulting thereof. -
Page 17: Introduction
Machine Description Pos: 16.11 /BA/Sicherheit/Schwader/Sicherheit Einführung Schwader @ 1\mod_1202219372123_78.docx @ 58050 @ @ 1 Introduction The rotary rake is equipped with all safety devices (protective devices). However, it is not possible to eliminate all potential hazards on this machine as this would impair its full functional capability. -
Page 18: Position Of The Adhesive Safety Stickers On The Machine
Machine Description Pos: 16.15 /Überschriften/Überschriften 2/K-O/Lage der Sicherheitsaufkleber an der Maschine @ 0\mod_1195634967326_78.docx @ 1020 @ @ 1 Position of the Adhesive Safety Stickers on the Machine Pos: 16.16 /BA/Sicherheit/Aufkleber/Schwader/Sicherheitsaufkleber Schwader TC 880_TC 880 X-tr @ 242\mod_1395321149469_78.docx @ 1899213 @ 2 @ 1 SW9000026_3 Fig. - Page 19 Order No. 942 196 1 (4x) 942 196 -1 Order No. 939 469 1 (2x) Swadro TC 880 X-treme only Keep the stipulated safe distance to power transmission lines. The accumulator is under gas and oil pressure.
-
Page 20: Technical Data Of The Machine
Width (with 11.5/80-15.3 10 PR TL tyres) 2840 Width (with 15.0/55-17 10 PR TL tyres) 2990 Pos: 19.6.2 /BA/Einleitung/Technische Daten/Schwader/Schwader 900#/Technische Daten: Abmessungen in Arbeitsstellung Swadro TC 880 und TC 880 X-treme @ 261\mod_1399552781640_78.docx @ 1995354 @ @ 1 Dimensions in Working Position Height 1600... - Page 21 Warning panels Working width adjustment Tine arms rigid Mechanical rotor height adjustment Pos: 19.6.7 /BA/Einleitung/Technische Daten/Schwader/Schwader 900#/Technische Daten: Ausrüstung der Maschine (optional) Swadro TC 880 @ 226\mod_1392715320350_78.docx @ 1826365 @ 22 @ 1 Machine equipment (optional) Swath cloth Tine arms folding...
- Page 22 Width (with 11.5/80-15.3 10 PR TL tyres) 2840 Width (with 15.0/55-17 10 PR TL tyres) 2990 Pos: 19.12.2 /BA/Einleitung/Technische Daten/Schwader/Schwader 900#/Technische Daten: Abmessungen in Arbeitsstellung Swadro TC 880 und TC 880 X-treme @ 261\mod_1399552781640_78.docx @ 1995354 @ @ 1 Dimensions in Working Position Height 1600...
- Page 23 40 km/h Lower link Height definable and side definable Pos: 19.12.6 /BA/Einleitung/Technische Daten/Schwader/Schwader 900#/Technische Daten: Ausrüstung der Maschine (Serie) Swadro TC 880 X-tr @ 219\mod_1391092138436_78.docx @ 1777757 @ @ 1 Machine equipment (series) Understeering coupling CAT II Number of rotors...
-
Page 24: Lubricants
Technical Data of the Machine Pos: 19.15 /Überschriften/Überschriften 2/P-T/Schmierstoffe @ 17\mod_1236177314933_78.docx @ 201837 @ 2 @ 1 Lubricants Pos: 19.16 /Überschriften/Überschriften 3/F-J/Füllmengen und Schmiermittelbezeichnungen der Getriebe @ 33\mod_1254230622207_78.docx @ 318675 @ 33 @ 1 6.2.1 Filling Quantities and Lubrication Designations for Gearboxes Pos: 19.17 /BA/Wartung/Umwelt/Hinweis Entsorgen / Lagern von Schmierstoffen Umwelt @ 32\mod_1253100514124_78.docx @ 311746 @ 122 @ 1 ENVIRONMENT! - Disposal and storage of lubricants Effect: Environmental damage... -
Page 25: Control And Display Elements
Control and Display Elements Pos: 21.1 /Überschriften/Überschriften 1/A-E/Bedien- und Anzeigeelemente @ 107\mod_1334231983896_78.docx @ 965285 @ 3311 @ 1 Control and Display Elements Pos: 21.2 /BA/Maschinenbeschreibung/Schwader/Funktionsübersicht Standard @ 250\mod_1396939092825_78.docx @ 1936072 @ 333 @ 1 The following table shows the functions on the machine (depending on machine design) Function Description Crank on left rotor... - Page 26 Control and Display Elements Pos: 21.4 /BA/Maschinenbeschreibung/Schwader/Funktionsübersicht Hydraulische Bedieneinheit @ 225\mod_1392617499198_78.docx @ 1821315 @ @ 1 With Hydraulic Single-Rotor Lifting Mechanism Design SW700086_1 Fig. 6 The position of the switching valve (1) determines which rotor is lifted or lowered. The actual movement is made via the single-acting control unit.
- Page 27 Control and Display Elements Pos: 21.6 /BA/Maschinenbeschreibung/Schwader/Funktionsübersicht elektrische Bedieneinheit_SW 900# @ 158\mod_1364914410995_78.docx @ 1394465 @ @ 1 With electric single-rotor lifting mechanism design SW700087 SW900002 Fig. 7 The following table explains the function of the individual switches. Switch Function 1) Main switch Switch on (I) and switch off (0) control unit.
-
Page 28: Commissioning
Commissioning Pos: 23.1 /Überschriften/Überschriften 1/A-E/Erstinbetriebnahme @ 0\mod_1196314201498_78.docx @ 5855 @ 1 @ 1 Commissioning Pos: 23.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Gefahr - Fehlerhafter Zusammenbau @ 1\mod_1202224212591_78.docx @ 58171 @ 2 @ 1 Danger! - Incorrect assembly Effect: Danger to life, serious injuries or serious damage to the machine. •... -
Page 29: First Installation
Commissioning Pos: 23.6 /Überschriften/Überschriften 2/A-E/Erstmontage @ 1\mod_1202226261982_78.docx @ 58270 @ 3333 @ 1 First installation Pos: 23.7 /BA/Inbetriebnahme/Erstinbetriebnahme/Erstmontage @ 1\mod_1202224111998_78.docx @ 58190 @ 333 @ 1 The document "Assembly Instructions" describes how to install the device for the first time. Pos: 23.8.1 /Überschriften/Überschriften 2/U-Z/Vorbereitungen am Traktor @ 2\mod_1202363643678_78.docx @ 58694 @ 2 @ 1 Preparations on tractor Pos: 23.8.2 /Überschriften/Überschriften 3/A-E/Aushubhöhe einstellen @ 0\mod_1196675396916_78.docx @ 10668 @ 33 @ 1... -
Page 30: Connecting The Lower Link
Commissioning Pos: 23.10 /Überschriften/Überschriften 2/U-Z/Unterlenker ankuppeln @ 134\mod_1350461609810_78.docx @ 1186832 @ 2 @ 1 Connecting the Lower Link Pos: 23.11 /BA/Inbetriebnahme/Schwader/Anbau an den Traktor/Unterlenker ankuppeln_Bild_Swadro TC 880_TC 880 X-tr @ 227\mod_1392731811759_78.docx @ 1827413 @ @ 1 SW9000003_1 Fig. 9 Pos: 23.12 /BA/Inbetriebnahme/Schwader/Anbau an den Traktor/Unterlenker ankuppeln_Text @ 133\mod_1349872612749_78.docx @ 1178384 @ @ 1 •... -
Page 31: Pto Shaft
Commissioning Pos: 23.16.1 /Überschriften/Überschriften 2/F-J/Gelenkwelle @ 0\mod_1199781879794_78.docx @ 34542 @ 2 @ 1 PTO shaft Pos: 23.16.2 /Überschriften/Überschriften 3/K-O/Längenanpassung @ 1\mod_1201687632810_78.docx @ 53589 @ 33 @ 1 8.6.1 Length adjustment Pos: 23.16.3 /BA/Erstinbetriebnahme/Gelenkwelle/Traktorwechsel Gelenkwellenlänge beachten @ 6\mod_1214996938591_78.docx @ 97742 @ 2332 @ 1 Caution! - Changing the tractor Effect: Damage to the machine When using the machine for the first time and whenever changing the tractor Check PTO shaft... -
Page 32: Regulating Direction Of Travel
Commissioning Pos: 23.18 /Überschriften/Überschriften 2/F-J/Fahrtrichtung regulieren @ 36\mod_1263299717731_78.docx @ 338702 @ 32 @ 1 Regulating direction of travel Pos: 23.19 /BA/Einstellungen/Schwader/Fahrtrichtung regulieren nur von Fachpersonal_Lenkgestänge voreingestellt @ 164\mod_1366197256672_78.docx @ 1427603 @ 3 @ 1 The steering linkage has been pre-adjusted in the factory. If a machine is hinged, make certain that the machine is driving straight ahead. -
Page 33: Checking The Locking Of The Transport Position
Commissioning Pos: 23.23 /Überschriften/Überschriften 2/P-T/Sicherung der Transportstellung prüfen @ 238\mod_1395045122526_78.docx @ 1884194 @ 32 @ 1 Checking the Locking of the Transport Position Pos: 23.24 /BA/Inbetriebnahme/Erstinbetriebnahme/Abstand Keil-Verriegelung_Bild_Swadro TC 880_TC 880 X-tr @ 238\mod_1395041868249_78.docx @ 1883945 @ 3 @ 1 SW9000048 Fig. -
Page 34: Setting The Rotor Inclination
Commissioning Pos: 23.27.1 /Überschriften/Überschriften 2/K-O/Kreiselneigung einstellen @ 191\mod_1381819931154_78.docx @ 1631074 @ 11 @ 1 Setting the Rotor Inclination Pos: 23.27.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Einstellarbeiten / Einstellungen/Gefahr - Einstellarbeiten gezogene Maschinen @ 224\mod_1392299165082_78.docx @ 1817635 @ 2 @ 1 DANGER! - Unexpected machine movement Effect: Danger to life or serious injuries. - Page 35 Commissioning Pos: 23.27.4.9 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Querneigung_TS 620 (Twin)_TS 680 (Twin)_TS 740 (Twin) @ 247\mod_1396366300182_78.docx @ 1924218 @ @ 1 Transverse inclination: A change of the transverse inclination (to the direction of travel) is reached if one of the rear guide wheels is set higher or deeper compared to the other guide wheel. Pos: 23.27.4.10 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @ @ 1 Pos: 23.27.4.11 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Vorgehensweise Swadro TC 680_TC 760 @ 223\mod_1392115608969_78.docx @ 1809320 @ @ 1 Do not walk beneath the raised rotor.
-
Page 36: With Trailing Wheel Version (Optional)
Commissioning Pos: 23.27.5.1 /Überschriften/Überschriften 3/A-E/Bei Ausführung nachlaufendes Rad (optional) @ 223\mod_1392126568526_78.docx @ 1810334 @ @ 1 8.9.2 With trailing wheel version (optional) Pos: 23.27.5.2 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Bild nachlaufendes Rad Swadro TC 680_TC 760_TS 620_TS 680 @ 247\mod_1396423997182_78.docx @ 1925374 @ 2 @ 1 SW700091_1 Fig. - Page 37 Commissioning Pos: 23.27.5.12 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselneigung einstellen über Langloch_Mittel- und Seitenschwader @ 247\mod_1396418696967_78.docx @ 1924755 @ 2 @ 1 Vernier adjustment by the screw on the oblong hole (3): − = Reducing rotor inclination + = Increasing rotor inclination Pos: 23.27.5.13 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselneigung Vorgehensweise Langloch_Mittel- und Seitenschwader @ 247\mod_1396419664129_78.docx @ 1924930 @ @ 1 Do not walk beneath the raised rotor.
-
Page 38: With Tandem Chassis Version (Optional)
Commissioning Pos: 23.27.6.1 /Überschriften/Überschriften 3/A-E/Bei Ausführung Tandemfahrwerk (optional) @ 223\mod_1392126673159_78.docx @ 1810363 @ @ 1 8.9.3 With tandem chassis version (optional) Pos: 23.27.6.2 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Bild Tandem Swadro TC 680_TC 760_TS 620_TS 680 @ 247\mod_1396423777783_78.docx @ 1925345 @ @ 1 SW700093 Fig. - Page 39 Commissioning Pos: 23.27.6.12 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselneigung einstellen über Platte_Mittel- und Seitenschwader @ 247\mod_1396419172322_78.docx @ 1924872 @ @ 1 Vernier adjustment via plate (1): − = Reducing rotor inclination + = Increasing rotor inclination Pos: 23.27.6.13 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselneigung Vorgehensweise Platte_Mittel- und Seitenschwader @ 247\mod_1396419978868_78.docx @ 1924959 @ @ 1 Do not walk beneath the raised rotor.
-
Page 40: Start-Up
Start-up Pos: 25.1 /Überschriften/Überschriften 1/F-J/Inbetriebnahme @ 0\mod_1196327075811_78.docx @ 6375 @ @ 1 Start-up Pos: 25.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Schwader/Gefahr - An-/ Abbau der Maschine gezogene Schwader @ 2\mod_1202363265522_78.docx @ 58675 @ 11 @ 1 Danger! - Assembling / dismantling the machine Effect: Danger to life or serious injuries. -
Page 41: Hydraulics
Start-up Pos: 25.10 /Überschriften/Überschriften 2/F-J/Hydraulik @ 0\mod_1199776034950_78.docx @ 34205 @ 33 @ 1 Hydraulics Pos: 25.11 /Überschriften/Überschriften 3/P-T/Spezielle Sicherheitshinweise @ 0\mod_1197301069931_78.docx @ 17662 @ @ 1 9.3.1 Special Safety Instructions Pos: 25.12 /BA/Sicherheit/Hydraulik/Warnung - Anschluss der Hydraulikleitungen @ 0\mod_1199776548685_78.docx @ 34225 @ @ 1 Warning ! - Connection of the hydraulic line Effect: severe injuries due to penetration of hydraulic oil under the skin. -
Page 42: Connecting The Hydraulic Lines
Start-up Pos: 25.16 /Überschriften/Überschriften 3/F-JHydraulikleitungen anschließen @ 0\mod_1199777037794_78.docx @ 34244 @ @ 1 9.3.2 Connecting the hydraulic lines Pos: 25.17 /BA/Inbetriebnahme/Schwader/Hydraulikanschluss/Hydraulikanschluss Bild diverse Schwader @ 227\mod_1392741743180_78.docx @ 1828574 @ @ 1 SW9070003_1 Fig. 18 Pos: 25.18 /BA/Inbetriebnahme/Hydraulikkupplungen anschließen alle Maschinen/Hydraulikkupplungen anschließen Teil1 @ 213\mod_1390207328923_78.docx @ 1749237 @ 3 @ 1 •... -
Page 43: Lighting Connection
Start-up Pos: 25.22 /Überschriften/Überschriften 2/A-E/Anschluss Beleuchtung @ 33\mod_1254385308979_78.docx @ 319105 @ @ 1 Lighting connection Pos: 25.23 /BA/Inbetriebnahme/Schwader/Anschluss Beleuchtung/Anschluss Beleuchtung Bild Swadro TC 880_TC 880 X-tr @ 227\mod_1392791909466_78.docx @ 1829318 @ @ 1 SW9000004_1 Fig. 19 Pos: 25.24 /BA/Inbetriebnahme/Schwader/Anschluss Beleuchtung/Anschluss Beleuchtung Text @ 36\mod_1260783798936_78.docx @ 336718 @ 2233 @ 1 The lighting system is connected via the 7-pin connection cable (1). -
Page 44: Connecting The Electrical Controls
Connecting the electrical controls Pos: 25.28 /Abkürzungen /Abkürzungen sprachneutral/SchwaderSwadro TC 880 X-treme (2014-05-14 11:31:12) @ 219\mod_1391091529951_0.docx @ 1777663 @ @ 1 Swadro TC 880 X-treme Pos: 25.29 /BA/Inbetriebnahme/Schwader/Anschluss elektrische Bedienung/Anschluss elektrische Bedienung SW 900# @ 160\mod_1365595155570_78.docx @ 1414659 @ @ 1 SW9000005 Fig. -
Page 45: Install The Pto Shaft
Effect: Danger to life or serious injuries • This machine is driven at a maximum PTO speed of 540 rpm. Pos: 25.35 /BA/Inbetriebnahme/Schwader/Anbau Gelenkwelle/Anbau Gelenkwelle Bild Swadro TC 880 @ 227\mod_1392795640656_78.docx @ 1829810 @ @ 1 SW9000006_1 Fig. 21 Pos: 25.36 /BA/Inbetriebnahme/Schwader/Anbau Gelenkwelle/Anbau Gelenkwelle angehängte Schwader Text_900# @ 162\mod_1366004320235_78.docx @ 1420425 @ 2 @ 1 •... -
Page 46: Using The Safety Chain
Start-up Pos: 25.38.1 /Überschriften/Überschriften 2/P-T/Sicherungskette verwenden @ 6\mod_1214542336632_78.docx @ 94799 @ @ 1 Using the safety chain Pos: 25.38.2 /BA/Inbetriebnahme/Sicherheitskette USA/WARNUNG - Falsch dimensionierte Sicherungskette verwendet mit Variante @ 180\mod_1376576652355_78.docx @ 1547873 @ @ 1 WARNING! When using a wrongly dimensioned safety chain, the safety chain may tear if the machine loosens unintentionally. - Page 47 Start-up Pos: 25.38.9 /BA/Inbetriebnahme/Sicherheitskette USA/Sicherungskette an der Maschine montieren_2-Punkt-Anhängung @ 229\mod_1393250532502_78.docx @ 1841295 @ @ 1 SW9000043_1 Fig. 23 Pos: 25.38.10 /BA/Inbetriebnahme/Sicherheitskette USA/Sicherungskette an der Maschine montieren_Text @ 168\mod_1368510725089_78.docx @ 1456755 @ 2222 @ 1 • Install the safety chain (1) on the machine. Pos: 25.39 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ 2222 @ 1...
-
Page 48: Swivelling Parking Support Into Transport Position
Start-up Pos: 25.40 /Überschriften/Überschriften 2/A-E/Abstellstütze in Transportstellung schwenken @ 10\mod_1221637347634_78.docx @ 135539 @ @ 1 Swivelling parking support into transport position Pos: 25.41 /BA/Inbetriebnahme/Schwader/Abstellstütze hochschwenken_Bild_Swadro TC 880 @ 227\mod_1392796716808_78.docx @ 1830162 @ 33 @ 1 SW9000007_1 Fig. 24 Pos: 25.42 /BA/Inbetriebnahme/Schwader/Abstellstütze hochschwenken @ 156\mod_1363933455290_78.docx @ 1379305 @ 2233 @ 1 •... -
Page 49: Driving And Transport
Driving and Transport Pos: 27.1 /Überschriften/Überschriften 1/F-J/Fahren und Transport @ 0\mod_1196330049217_78.docx @ 6553 @ 33 @ 1 Driving and Transport Pos: 27.2 /BA/Sicherheit/Fahren und Transport/Mitfahren Straßenfahrt/Warnung- Straßenfahrt nicht verkehrssicher Maschine Swadros SW 700#_800# SW 710 T @ 135\mod_1351239075556_78.docx @ 1197325 @ 3333 @ 1 WARNING! Wrongdoing in road traffic and a machine that is not roadworthy can lead to accidents with fatal injuries. - Page 50 Driving and Transport Pos: 27.5 /BA/Fahren und Transport/Schwader/Prüfen Sie vor der Straßenfahrt, dass Swadro TC 880 @ 232\mod_1393516933450_78.docx @ 1852861 @ 3 @ 1 SW9000009 Fig. 26 Before road travel, make sure that • the machine is fully and correctly hitched.
-
Page 51: Fixing The Rotors
Driving and Transport Pos: 27.8 /Überschriften/Überschriften 2/K-O/Kreisel arretieren @ 161\mod_1365678308744_78.docx @ 1416366 @ @ 1 10.2 Fixing the Rotors Pos: 27.9 /BA/Sicherheit/7. Gefahrenhinweise alt/Einstellarbeiten / Einstellungen/Gefahr - Einstellarbeiten gezogene Maschinen @ 224\mod_1392299165082_78.docx @ 1817635 @ 2 @ 1 DANGER! - Unexpected machine movement Effect: Danger to life or serious injuries. -
Page 52: Lifting The Rotor Arms To Transport Position
Driving and Transport Pos: 27.13 /Überschriften/Überschriften 2/K-O/Kreiselarme in die Transportstellung anheben @ 37\mod_1263480684659_78.docx @ 340021 @ @ 1 10.3 Lifting the rotor arms to transport position Pos: 27.14 /BA/Bedienung /Schwader/Gefahr! - Fahren im Hangbereich @ 162\mod_1365743843688_78.docx @ 1419045 @ 22 @ 1 Danger! - Travelling on an incline (danger of turning over!). -
Page 53: For Design Without Single-Rotor Lifting Mechanism
Driving and Transport Pos: 27.17 /Überschriften/Überschriften 3/A-E/Bei Ausführung ohne Einkreiselaushebung @ 77\mod_1310110349917_78.docx @ 667808 @ @ 1 10.3.1 For design without single-rotor lifting mechanism Pos: 27.18 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme heben_I_ohne Einkreiselaushebung SW 900# Bild @ 161\mod_1365687596731_78.docx @ 1418666 @ 22 @ 1 SW9000034 Fig. -
Page 54: For Design With Hydraulic Single-Rotor Lifting Mechanism
Pos: 27.23 /Überschriften/Überschriften 3/A-E/Bei Ausführung mit hydraulischer Einkreiselaushebung @ 77\mod_1310050459478_78.docx @ 667495 @ @ 1 10.3.2 For design with hydraulic single-rotor lifting mechanism Pos: 27.24 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme heben_I_hydraulische Einkreiselaushebung Swadro TC 880 @ 228\mod_1392802404599_78.docx @ 1831147 @ 2 @ 1 SW9000010_1 Fig. 30 Pos: 27.25 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme heben_I_hydraulische Einkreiselaushebung SW 900# Text @ 161\mod_1365687745416_78.docx @ 1418754 @ 2222 @ 1... -
Page 55: For Design With Electrical Single-Rotor Lifting Mechanism
Pos: 27.30 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme heben_I_elektrische Einkreiselaushebung SW 900# Bild @ 162\mod_1365687847413_78.docx @ 1418842 @ 2 @ 1 SW9000033 Fig. 32 Pos: 27.31 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme heben_I_elektrische Einkreiselaushebung Swadro TC 880 @ 266\mod_1400665906686_78.docx @ 2020077 @ 2 @ 1 • Prerequisite: The rotors are in working position. -
Page 56: Protecting The Tine Tips (Transport Position And Rotary Rake Switched Off)
Driving and Transport Pos: 27.38 /Überschriften/Überschriften 2/U-Z/Zinkenschutze anbringen @ 36\mod_1263218287043_78.docx @ 338452 @ 2222 @ 1 10.4 Protecting the tine tips (transport position and rotary rake switched off) Pos: 27.39 /BA/Bedienung /Schwader/Zinken / Zinkenarme/Zinkenschutze anbringen Bild SW 900# @ 160\mod_1365598502157_78.docx @ 1415053 @ 22222222 @ 1 SW9000012 Fig. -
Page 57: Operation
Operation Pos: 29.1 /Überschriften/Überschriften 1/A-E/Bedienung @ 0\mod_1199789505403_78.docx @ 34825 @ 2222322223 @ 1 Operation Pos: 29.2 /Überschriften/Überschriften 2/U-Z/Vorbereitung zum Schwaden @ 134\mod_1350559748774_78.docx @ 1188971 @ @ 1 11.1 Preparation for Swathing Pos: 29.3 /BA/Bedienung /Schwader/Maschine ist für Vorwärtsfahrt konzipiert. @ 66\mod_1302175087311_78.docx @ 615098 @ 2 @ 1 WARNING! –... -
Page 58: Lowering The Rotor Arms Into Working Position
Operation Pos: 29.8 /Überschriften/Überschriften 2/K-O/Kreiselarme in die Arbeitsstellung absenken @ 37\mod_1263474967690_78.docx @ 339871 @ 2 @ 1 11.3 Lowering the rotor arms into working position Pos: 29.9 /BA/Sicherheit/7. Gefahrenhinweise alt/Schwader/Gefahr Maschine absenken @ 5\mod_1213694805078_78.docx @ 88774 @ @ 1 Danger! – Lowering the machine into working position Danger to life, injuries or damage to the machine. -
Page 59: For Design With Hydraulic Single-Rotor Lifting Mechanism
Pos: 29.15 /Überschriften/Überschriften 3/A-E/Bei Ausführung mit hydraulischer Einkreiselaushebung @ 77\mod_1310050459478_78.docx @ 667495 @ @ 1 11.3.2 For design with hydraulic single-rotor lifting mechanism Pos: 29.16 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme senken_hydraulische Einkreiselaushebung Swadro TC 880 @ 227\mod_1392801826987_78.docx @ 1831005 @ @ 1 SW9000036_1 Fig. 37 Pos: 29.17 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme senken_hydraulische Einkreiselaushebung SW 900# Text @ 162\mod_1366013818547_78.docx @ 1421120 @ @ 1... -
Page 60: For Design With Electrical Single-Rotor Lifting Mechanism
Pos: 29.20 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme senken_elektrische Einkreiselaushebung SW 900# Bild @ 162\mod_1366013893676_78.docx @ 1421149 @ 3 @ 1 SW9000037 Fig. 38 Pos: 29.21 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme senken_elektrische Einkreiselaushebung Swadro TC 880 @ 266\mod_1400663151626_78.docx @ 2020048 @ @ 1 • Prerequisite: The rotors are in transport position. -
Page 61: Releasing Rotor Locking Device
Operation Pos: 29.25 /Überschriften/Überschriften 2/K-O/Kreiselarretierung lösen @ 161\mod_1365680637296_78.docx @ 1416960 @ @ 1 11.4 Releasing Rotor Locking Device Pos: 29.26 /BA/Sicherheit/7. Gefahrenhinweise alt/Einstellarbeiten / Einstellungen/Gefahr - Einstellarbeiten gezogene Maschinen @ 224\mod_1392299165082_78.docx @ 1817635 @ 3 @ 1 DANGER! - Unexpected machine movement Effect: Danger to life or serious injuries. -
Page 62: Move The Hoop Guards To The Working Position
Effect: Injury to hands Do not hold onto hoop guards to swivel within range of the rotating points. Pos: 29.32 /BA/Bedienung /Schwader/Schutzbügel/Schutzbügel in Arbeitsstellung bringen Bild Swadro TC 880 @ 228\mod_1392812921831_78.docx @ 1832180 @ 2 @ 1 SW9000015_1 Fig. 40 Pos: 29.33 /BA/Bedienung /Schwader/Schutzbügel/Schutzbügel in Arbeitsstellung bringen Text SW700#_800#_900# @ 133\mod_1350033039848_78.docx @ 1180812 @ @ 1... -
Page 63: Adjusting The Working Width
Operation Pos: 29.39 /Überschriften/Überschriften 2/A-E/Arbeitsbreite einstellen @ 77\mod_1310103035622_78.docx @ 667585 @ 22 @ 1 11.7 Adjusting the Working Width Pos: 29.40 /BA/Sicherheit/7. Gefahrenhinweise alt/Einstellarbeiten / Einstellungen/Gefahr - Einstellarbeiten gezogene Maschinen @ 224\mod_1392299165082_78.docx @ 1817635 @ @ 1 DANGER! - Unexpected machine movement Effect: Danger to life or serious injuries. -
Page 64: Setting The Working Depth
Operation Pos: 29.45 /Überschriften/Überschriften 2/A-E/Arbeitstiefe einstellen @ 133\mod_1350376069479_78.docx @ 1183290 @ 2 @ 1 11.8 Setting the Working Depth Pos: 29.46 /BA/Bedienung /Schwader/Kreiselhöhe einstellen (vorher: Arbeitstiefe)/Einstellen der Arbeitstiefe_mechanisch_SW TC 880 @ 228\mod_1392816204851_78.docx @ 1832472 @ 223 @ 1 With Mechanic Design SW9070091_1 Fig. - Page 65 Pos: 29.49 /Abkürzungen /Abkürzungen sprachneutral/Schwader/Swadro TC 880 X-treme (2014-05-14 11:31:12) @ 219\mod_1391091529951_0.docx @ 1777663 @ 22232 @ 1 Swadro TC 880 X-treme Pos: 29.50 /BA/Bedienung /Schwader/Kreiselhöhe einstellen (vorher: Arbeitstiefe)/Einstellen der Arbeitstiefe_elektrisch_Bild Swadro TC 880 @ 235\mod_1394190509794_78.docx @ 1869427 @ 3 @ 1 SW700087 SW9000031 Fig.
-
Page 66: Selecing Rotor Operation
Operation Pos: 29.53 /BA/Bedienung /Schwader/Schwaden/Kreiselbetrieb wählen @ 134\mod_1350632999853_78.docx @ 1190195 @ 332233 @ 1 11.9 Selecing Rotor Operation Depending on how the machine is equipped, different rotor operations can be selected with the rotary rake. Twin-rotor operation: Swath placement to the middle with right and left rotor Single rotor operation: Swath placement to the middle with left rotor Single rotor operation: Swath placement to the middle with the right rotor Pos: 29.54 /BA/Bedienung /Schwader/Schwaden/ÜS_2_Kreiselbetriebe (bei Ausführung hydraulische Einkreiselaushebung) @ 134\mod_1350632794166_78.docx @ 1190167 @ 22 @ 1... -
Page 67: Rotor Operation (With Electric Single-Rotor Lifting Mechanism Design)
Operation Pos: 29.57 /BA/Bedienung /Schwader/Schwaden/ÜS 2_Kreiselbetriebe (bei Ausführung elektrische Einkreiselaushebung) @ 134\mod_1350632622755_78.docx @ 1190081 @ 3 @ 1 11.11 Rotor Operation (With Electric Single-Rotor Lifting Mechanism Design) Pos: 29.58 /BA/Bedienung /Schwader/Schwaden/Kreiselbetriebe bei Ausführung elektrische Einkreiselaushebung_SW900# @ 161\mod_1365663793228_78.docx @ 1415983 @ 22 @ 1 SW700087 SW9000032 Fig. -
Page 68: Travelling On An Incline
Operation Pos: 29.60 /BA/Bedienung /Schwader/Fahren im Hangbereich @ 2\mod_1202724671955_78.docx @ 60415 @ 2222 @ 1 11.12 Travelling on an incline Danger! - Travelling on an incline (danger of turning over!). Effect: Danger to life, injuries or damage to the machine. •... -
Page 69: Swathing
The overload protection must not be changed. The guarantee becomes invalid if an overload protection is used other the protection provided! Pos: 29.67 /BA/Bedienung /Schwader/Überlastsicherung/Überlastsicherung Bild Swadro TC 880 @ 228\mod_1392816669538_78.docx @ 1832501 @ 22 @ 1 SW9000018_1 Fig. 47 Overload protection Pos: 29.68 /BA/Bedienung /Schwader/Überlastsicherung/Überlastsicherungen am Hauptgetriebe Text @ 134\mod_1350633091118_78.docx @ 1190223 @ 23 @ 1... -
Page 70: Parking
Move the appropriate control valves into float position. Pos: 29.72 /BA/Bedienung /Schwader/Abbau/Abbau vom Traktor Bild Swadro TC 880, TS 620, TS 680, TS 740 @ 235\mod_1394434210007_78.docx @ 1870135 @ 22211112 @ 1 SW9000019_1 Fig. - Page 71 Operation Pos: 31 /Layout Module /Diese Seite ist bewusst freigelassen worden. @ 1\mod_1201783680373_78.docx @ 54443 @ 22 @ 1 This page has been left blank deliberately!! Pos: 32 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ 22222222 @ 1...
-
Page 72: Settings
Settings Pos: 33 /Überschriften/Überschriften 1/A-E/Einstellungen @ 0\mod_1199868783862_78.docx @ 36141 @ 2222 @ 1 Settings Pos: 34.1 /Überschriften/Überschriften 2/A-E/Einstellbare Drosseln @ 0\mod_1197295892260_78.docx @ 17199 @ 2 @ 1 12.1 Adjustable throttles Pos: 34.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Einstellarbeiten / Einstellungen/Gefahr - Einstellarbeiten gezogene Maschinen @ 224\mod_1392299165082_78.docx @ 1817635 @ 2133 @ 1 DANGER! - Unexpected machine movement Effect: Danger to life or serious injuries. -
Page 73: Maintenance
Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability • Use only authentic KRONE spare parts and accessories authorised by the manufacturer. The use of spare parts, accessories or additional equipment not manufactured, tested or approved by KRONE will exclude any liability for consequential damage. -
Page 74: Maintenance Table
Maintenance Pos: 36.8 /Überschriften/Überschriften 2/U-Z/Wartungstabelle @ 65\mod_1300369413064_78.docx @ 583966 @ 2222 @ 1 13.3 Maintenance table Pos: 36.9 /BA/Wartung/Schwader/Wartungstabelle - Swadro TC 880_TC 880 X-tr @ 238\mod_1395046773618_78.docx @ 1884362 @ 2 @ 1 Maintenance interval Maintenance work Rotor gearbox Maintenance-free (permanently lubricated with grease) Main gearbox Oil level check Oil change... -
Page 75: Tightening Torques
Maintenance Pos: 36.11 /Überschriften/Überschriften 2/A-E/Anzugsdrehmomente @ 45\mod_1277103093968_78.docx @ 410970 @ @ 1 13.4 Tightening Torques Pos: 36.12 /BA/Wartung/Drehmomente / Anzugsmomente/Drehmomente @ 45\mod_1277102920578_78.docx @ 410945 @ 11 @ 1 A = Thread size The tightening torque M is stated in Nm (The stability class can be seen on the head of the (unless otherwise indicated). -
Page 76: Tightening Torques (Countersunk Screws)
Maintenance Pos: 36.14 /Überschriften/Überschriften 2/A-E/Anzugsdrehmomente über Innensechskant @ 45\mod_1277106415765_78.docx @ 411230 @ 21111123333 @ 1 13.5 Tightening Torques (Countersunk Screws) Pos: 36.15 /BA/Wartung/Drehmomente / Anzugsmomente/Drehmomente über Innensechskant @ 45\mod_1277106232328_78.docx @ 411205 @ 222 @ 1 A = Thread size The tightening torque M is stated in Nm (The stability class can be seen on the head of the (unless otherwise indicated). -
Page 77: Deviating Torque
Maintenance Pos: 36.17 /Überschriften/Überschriften 2/A-E/Abweichendes Drehmoment @ 155\mod_1363620849669_78.docx @ 1373212 @ @ 1 13.6 Deviating Torque Pos: 36.18 /BA/Wartung/Schwader/Zinken / Zinkenarme/Prüfen der Schrauben an den Zinken nach Wartungstabelle_SW TC 880_TS 800 @ 228\mod_1392820024661_78.docx @ 1833280 @ 1 @ 1 13.6.1 Testing the Screws on the Tines Fig. -
Page 78: Tyres
If tyres are not correctly fitted, it could explode when pumped up. This can cause serious injury. If you do not have sufficient experience of fitting tyres, have tyres fitted by the KRONE dealer or a qualified tyre specialist. •... - Page 79 Maintenance Pos: 36.24 /Layout Module /Diese Seite ist bewusst freigelassen worden. @ 1\mod_1201783680373_78.docx @ 54443 @ @ 1 This page has been left blank deliberately!! Pos: 36.25 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1...
-
Page 80: Replacing The Tine Arms (In Case Of Repair)
Maintenance Pos: 36.26.1 /Überschriften/Überschriften 2/A-E/Austausch der Zinkenarme (im Reparaturfall) @ 36\mod_1262854646297_78.docx @ 338320 @ 222222222 @ 1 13.8 Replacing the tine arms (in case of repair) Pos: 36.26.2 /BA/Wartung/Schwader/Zinken / Zinkenarme/Austausch der Zinkenarme (im Reparaturfall) Bild außer Swadro TS 800_TC 1000 @ 224\mod_1392272631028_78.docx @ 1814375 @ 222222 @ 1 SW700041_1 Fig. - Page 81 Maintenance Pos: 36.26.4 /BA/Wartung/Schwader/Zinken / Zinkenarme/Kleben der Zinkenarme @ 3\mod_1204276891493_78.docx @ 70234 @ @ 1 In case of repairs, the tine arms can be removed and replaced individually. • Unscrew the screws (1) of the tine arm • Loosen the bolts (2) on the nearby tine arms •...
-
Page 82: Replacing The Tines (In Case Of Repairs)
Maintenance Pos: 36.28.1 /Überschriften/Überschriften 2/U-Z/Zinken tauschen (im Reparaturfall) @ 224\mod_1392293057621_78.docx @ 1816928 @ @ 1 13.9 Replacing the tines (in case of repairs) Pos: 36.28.2 /BA/Wartung/Schwader/Zinken / Zinkenarme/Zinken tauschen (im Reparaturfall) ohne Abweisblech Bild mit Tabelle @ 225\mod_1392307492506_78.docx @ 1818595 @ 1 @ 1 SWN1400036_1 Fig. -
Page 83: Maintenance - Lubrication Chart
Maintenance – lubrication chart Pos: 36.30.1 /Überschriften/Überschriften 1/U-Z/Wartung - Schmierplan @ 0\mod_1197359304198_78.docx @ 18232 @ 111122222 @ 1 Maintenance – lubrication chart Pos: 36.30.2 /Überschriften/Überschriften 2/P-T/Spezielle Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 111 @ 1 14.1 Special Safety Instructions Pos: 36.30.3 /BA/Sicherheit/7. Gefahrenhinweise alt/Ladewagen/Gefahr Wartung allgemein @ 249\mod_1396605463987_78.docx @ 1933029 @ 11122222222 @ 1 DANGER! - When performing repair, maintenance or cleaning work on the machine, or in the case of technical intervention, drive elements may start moving. -
Page 84: Lubrication Points On The Machine
To make the illustration easier to read, the greasing points have only been shown on one side of the machine. The greasing same points are present on the other side of the machine (mirror- image). Pos: 36.30.9 /BA/Wartung/Schwader/Schmierplan/Schmierplan Swadro TC 880 @ 229\mod_1393226107181_78.docx @ 1838187 @ @ 1 SW9000023_1 Fig. 56... - Page 85 Maintenance – lubrication chart Lubricate the lubrication points every 20 operating hours. Pos: 36.31 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1...
-
Page 86: Maintenance - Hydraulic System
Ensure that all line connections are tight before the pressure in the system builds up again. • Repair work on the hydraulic system must only be performed by authorised KRONE professional workshops. Pos: 36.34 /BA/Sicherheit/Hydraulik/WARNUNG - Hydraulikschlauchleitungen unterliegen einer Alterung @ 256\mod_1397735975770_78.docx @ 1965100 @ @ 1 WARNING! –... -
Page 87: Maintenance - Gearbox
Maintenance - Gearbox Pos: 36.36 /Überschriften/Überschriften 1/U-Z/Wartung - Getriebe @ 2\mod_1203058202823_78.docx @ 64495 @ @ 1 Maintenance - Gearbox Pos: 36.37 /Überschriften/Überschriften 2/F-J/Hauptgetriebe @ 0\mod_1197005740033_78.docx @ 15416 @ @ 1 16.1 Main gearbox Pos: 36.38 /BA/Wartung/Ölkontrolle_Wechsel/Schwader/Hauptgetriebe/Hauptgetriebe Bild SW 900# @ 161\mod_1365665656885_78.docx @ 1416131 @ @ 1 SW9000025 Fig. -
Page 88: Special Equipment
Special equipment Pos: 38.1 /Überschriften/Überschriften 1/P-T/Sonderausstattung @ 2\mod_1202808469779_78.docx @ 61649 @ 111 @ 1 Special equipment Pos: 38.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Einstellarbeiten / Einstellungen/Gefahr - Einstellarbeiten gezogene Maschinen @ 224\mod_1392299165082_78.docx @ 1817635 @ @ 1 DANGER! - Unexpected machine movement Effect: Danger to life or serious injuries. •... -
Page 89: Chain For Height Restriction Of Suspension Arms
Special equipment Pos: 38.5 /BA/Sonderausstatung/Schwader/Kette zur Tiefenbegrenzung der Unterlenker @ 2\mod_1202808127295_78.docx @ 61611 @ @ 1 17.2 Chain for height restriction of suspension arms Figure 59 • Secure chains (1) with a spring-type slotted straight pin (3) and a washer (2) at the suspension arm seats. -
Page 90: Placing In Storage
Placing in Storage Pos: 40.1 /Überschriften/Überschriften 1/A-E/Einlagerung @ 0\mod_1197385459120_78.docx @ 19966 @ @ 1 Placing in Storage Pos: 40.2 /Überschriften/Überschriften 2/P-T/Spezielle Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ @ 1 18.1 Special Safety Instructions Pos: 40.3 /BA/Sicherheit/7. Gefahrenhinweise alt/Ladewagen/Gefahr Wartung allgemein @ 249\mod_1396605463987_78.docx @ 1933029 @ @ 1 DANGER! - When performing repair, maintenance or cleaning work on the machine, or in the case of technical intervention, drive elements may start moving. -
Page 91: At The End Of The Harvest Season
Perform the necessary repair tasks during the time immediately after the harvest season. Draw up a list of all replacement parts you will need. This will make it easier for your KRONE dealer to process your orders and you will be certain that your machine will be ready for use at the beginning of the next season. -
Page 92: Before The Start Of The New Season
Placing in Storage Pos: 40.8 /Überschriften/Überschriften 2/U-Z/Vor Beginn der neuen Saison @ 0\mod_1197386024448_78.docx @ 20081 @ @ 1 18.3 Before the Start of the New Season Pos: 40.9 /Überschriften/Überschriften 2/P-T/Spezielle Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 11 @ 1 18.4 Special Safety Instructions Pos: 40.10 /BA/Einlagerung/Schwader/Vor der Saisaon @ 2\mod_1202809277951_78.docx @ 61689 @ 111111 @ 1 •... -
Page 93: Malfunctions - Causes And Remedies
Malfunctions - Causes and Remedies Pos: 42.1 /Überschriften/Überschriften 1/P-T/Störungen - Ursachen und Behebung @ 0\mod_1200296925180_78.docx @ 39459 @ @ 1 Malfunctions - Causes and Remedies Pos: 42.2 /Überschriften/Überschriften 2/P-T/Spezielle Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ @ 1 19.1 Special Safety Instructions Pos: 42.3 /BA/Sicherheit/7. - Page 94 Malfunctions - Causes and Remedies Pos: 42.5 /BA/Störungen - Ursachen und Behebung/Schwader/Tabellarische Auflistung Schwader 900# @ 161\mod_1365665821037_78.docx @ 1416190 @ @ 1 Malfunction Possible cause Remedy Rotor does not work Raking height set too high Set raking height lower smoothly The working speed is too Reduce the travelling speed.
-
Page 95: Appendix
Appendix Pos: 44 /Überschriften/Überschriften 1/A-E/Anhang @ 1\mod_1202278612285_78.docx @ 58360 @ @ 1 Appendix Pos: 45 /BA/Anhang/Schwader/Im Anhang finden Sie den Schaltplan @ 2\mod_1202811415263_78.docx @ 61821 @ @ 1 The circuit diagram can be found in the Appendix. === Ende der Liste für Textmarke Inhalt ===... - Page 101 Index A L Adjustable throttles ..........72 Lifting the rotor arms to transport position ..52 Adjusting the Lifting Height ......... 29 Lighting connection ..........43 Adjusting the Working Width ......63 Lowering the rotor arms into working position ... 58 Affixing the Adhesive Safety and Information Lubricants ............
- Page 102 Safety Instructions on the Machine ....14 Test run .............. 73 Safety-conscious work practices ......8 Tightening Torque ..........77 Selecting Rotor Operation ........66 Tightening Torques ..........75 Setting the Rotor Inclination ....... 34 Tightening Torques (Countersunk Screws) ..76 Setting the Working Depth ........
- Page 104 . . konsequent, kompetent Maschinenfabrik Bernard Krone GmbH Heinrich-Krone-Straße 10, D-48480 Spelle Postfach 11 63, D-48478 Spelle Phone +49 (0) 59 77/935-0 +49 (0) 59 77/935-339 Internet: http://www.krone.de eMail: info.ldm@krone.de...
Need help?
Do you have a question about the Swadro TC 880 and is the answer not in the manual?
Questions and answers