Tyres; Air Pressure; Wheel Fixings - Krone Swadro 1010 Operating Instructions Manual

Rotary swather
Table of Contents

Advertisement

Care and maintenance
The tine screws (1) must be retightened to the specified
tightening torque after they have been used for the first
time.
6.3

Tyres

• Installing wheels and tyres requires sufficient knowledge and the availability of proper tools!
• Repair work on the tyres and wheels may only be carried out by specialists using appropriate
tools!
• Set down rotary swather on firm, even ground. Prevent unintended rolling away with wedges.
• Regularly check that wheel nuts are properly seated and tighten if necessary!
• Regularly check air pressure!
6.3.1

Air pressure

Check the tyre pressure at regular intervals (100 h) and
refill if necessary. The values can be found in the
adjacent table.
6.3.2

Wheel fixings

Regularly (50 h) check that wheel nuts are properly
seated and tighten if necessary! The sequence in the
graphic opposite should be observed.
VI - 2
Swadro 1010
Tyres
Tridem-axle
16 x 6.50-8.4 PR
Main chassis
15.0/55-17 10 PR
6
4
1
SW700030
Tyre pressure
[bar]
1
2,0
1
3
5
2
KS-0-034

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Swadro 1010 and is the answer not in the manual?

Table of Contents