Table of Contents
Advertisement
10 Starting up again
•
Wipe off the oil and grease applied as preservative to
the chains and inside the machine.
•
Thoroughly degrease the machine. Hence
condensation which has possibly collected in the
bearings is removed.
•
Check the oil level of the gearbox, if necessary top
up according to instructions.
•
Retighten all nuts and bolts.
•
Check all settings on the machine, reset if
necessary.
•
Carefully read the operating manual again.
It is preferable to use plant-based oils and
greases.
Starting up again
X - 1
Advertisement
Table of Contents
Need help?
Do you have a question about the Swadro 1010 and is the answer not in the manual?