Attachment Of Swather To Tractor; Attachment To The Tractor Lower Link Arms - Krone Swadro 1010 Operating Instructions Manual

Preparing for Operation

3.3 Attachment of swather to tractor

• During all care, maintenance, repair and assembly work on the rotary swather, switch off the
PTO, shut down the engine, remove the ignition key. Secure the tractor and rotary swather
against rolling away!
It is assumed in the following description,
that after final assembly, the swather is in
the transport position.
3.3.1 Attachment to the tractor lower link
arms
• When attaching the rotary swather
make sure that no-one remains
between the implement and the
tractor.
• No-one may remain in the slewing
range of the swather disk arms!
Attach rotary swathers with the lower link arm pins to the
tractor and raise them a little.
Slew the supporting foot (1) by 90° to the rear and lock
in this position with the brace (2).
III - 2
2
SW101004
1
SW101016