Sending A Call To Voice Mail; Disconnecting From A Call And Remaining On The Line; Creating A Conference Call - Toshiba Strata CS User Manual

Sending a call to voice mail

Disconnecting from a call and remaining on the line

Creating a conference call

C 4. A
HAPTER NSWERING AND
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
3.
Enter the extension to which you want to transfer the call. If you do not
know the extension, press
4.
Complete the transfer in one of the following ways:
Blind transfer. Hang up the phone to complete the transfer. After a
n
pause, pick up the phone again and press
calls on hold.
Supervised transfer. Speak to the recipient as necessary to
n
announce the transfer. To complete the transfer, press
then press
4
You can send a call directly to your voice mail or the voice mail of any user.
1. Press .
Flash 2
2.
Enter the extension of the voice mailbox to which you want to send the
call.
3.
Hang up.
You can disconnect from a call and remain on the line. This capability is useful if
you are calling into Strata CS from a remote phone and making a series of
outgoing calls through Strata CS. By disconnecting from your current outgoing
call only, you do not have to repeatedly dial into Strata CS. Your connection with
Strata CS continues, and you can proceed to make more outgoing calls.
To disconnect from your current call at a remote phone, press
from a remote phone you would press
You can create a conference call of up to seven (7) parties in the following ways:
By adding parties
n
By connecting separate calls
n
To create a conference call by adding parties
1.
Dial the first party and wait for an answer.
2. Press
Flash #
3.
Dial the second party and wait for an answer.
4. Press . You and the two parties you called are now conferenced
Flash 5
in a single call.
H C
ANDLING ALLS ON THE
and select the user by name.
411
to return to your calls on hold.
.
** 3
for a dial tone to start another call.
P
HONE
to return to your
Flash 4
, and
Flash 2
. Note that
Flash 3
4-7