Enabling And Disabling Hands-Free Answering In The Client; Using The Call Monitor View With Voice-First Answering; Enabling And Disabling Voice-First Answering In The Client - Toshiba Strata CS User Manual

Enabling and disabling hands-free answering in the Client

Using the Call Monitor view with voice-first answering ____

Enabling and disabling voice-first answering in the Client

10-16
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
1.
On the main menu, click
opens.
2.
Click the Phone tab.
3.
Select the
Enable hands-free answering
box to turn hands-free answering off.
4. Enter the desired time in the
identifies how long a dial tone plays after the end of a call before the
station reverts to silence waiting for the next call. A setting of 0
indicates no dial tone, in which case the station reverts to silence as soon
as a call ends.
5. Click .
OK
You can use all Call Monitor view commands and features with voice-first
answering. For an overview of voice-first answering, see "Using voice-first
answering" on page 4-10.
1.
On the main menu, click
opens.
2. Click the Phone tab.
3. Select the
Enable voice-first answering
box to turn voice-first answering off.
4.
Click OK .
Note:
Voice-first answering will not work when hands-free answering is also
enabled.
. The Options dialog box
Tools > Options
check box. Clear the check
Dial tone time-out seconds
. The Options dialog box
Tools > Options
check box. Clear the check
S CS C
TRATA
. This setting
U G
LIENT SER UIDE