Panasonic FP Series Programming Manual page 474

Hide thumbs Also See for FP Series:

Table of Contents

If the input value x is smaller than the x-coordinate of the first reference point (P1: x < x1), the

output y is set to the first reference point's y-coordinate (output y = y1, horizontal dashed line in the

graph's upper left corner).

If the input value x is greater than the x-coordinate of the last reference point (P8: x > x8), the

output y is set to the last reference point's y-coordinate (output y = y8, horizontal dashed line in the

graphic's upper right corner).

 DUT for the xy value pairs (reference points P1, P2, ...):

The reference points (P1, P2, ...) are copied to the function via a DUT-type variable that contains

the number of reference points and the xy value pairs (number; x1, x2, ...; y1, y2; ...).

Structure of the DUT:

1. Entry: Variable of the data type INT that contains the number of reference points.

The number of reference points (xy value pairs) can be anywhere between 2 ... 100. In the graph, eight reference points (P1 ... P8) are used.

2. Entry: Variable of the data type ARRAY [0..z] OF DINT that contains the x

represents the place marker for the number of reference points (see entry 1).

3. Entry: Variable of the data type ARRAY [0..z] OF DINT that contains the y

represents the place marker for the number of reference points (see entry 1).

 Important information:

The x values have to be entered in an ascending order (x1 < x2 < x3 < ...). If the x values are the

same (e.g. x2 = x3 = x4) the reference points P2(x2,y2) and P3(x3,y3) are ignored.

Overflow of the function:

In order to avoid an overflow in the calculation, neighboring reference points must fulfill the

following conditions:

|ya - yb| < 2147483647

< 2147483647

|(ya - yb)*(x - xb)|

|xa - xb| < 2147483647

Accuracy of the calculation:

This function can only process whole numbers. Numbers that follow the decimal point are cut out

when calculating the value y. For example, if at the position x, y = 511,13, the function returns the

for an instant

 Limitations of the output value y:

< 2147483647

 the number of reference points is not

between 2 ... 100, or the x values are not

in ascending order (x1 < x2 < x3 < ...).

Arithmetic instructions