Panasonic FP Series Programming Manual page 331

Hide thumbs Also See for FP Series:

Table of Contents

Timer instructions

ADD_TIME adds the times of the two input variables and writes the sum in the output variable.

To add an enable input and enable output to the instruction, select [With EN/ENO] from the

"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the

context menu or press <Ctrl>+<Shift>+<v> in the programming window.

Availability of ADD_TIME (see page 1318)

In this example, the same POU header is used for all programming languages. For an example

using IL (instruction list), please refer to the online help.

All input and output variables used for programming this function have been declared in the POU

In this example the input variables (time_value_1 and time_value_2) have been declared. Instead,

you may enter constants directly at the input contacts of a function.

Time_value_1 and time_value_2 are added. The result is written into time_value_3.

time_value_3:=ADD_TIME(time_value_1, time_value_2);