Swap Headsets While On A Call; Cisco Ip Phone 8800 Key Expansion Module - Cisco 8811 User Manual

Accessories

Swap Headsets While on a Call

You can connect an analog headset, a Bluetooth headset, and a USB headset simultaneously to your phone.
However,you can use only one headset at a time.
When you connect multiple headsets to the phone, you can switch among the headsets during a call by pressing
the Headset key on the phone. Though the phone is connected to multiple devices, you see a specific headset
is selected as the preferred audio device in the following priority order:
• When you connect a USB headset, a Bluetooth, and an analog headset to the phone, you can make your
• When you connect a Bluetooth and an analog headset to the phone, you can make your Bluetooth device
• When you connect only an analog headset to the phone, you make your analog headset the preferred
Procedure
Step 1
Before you make or answer a call, press Headset.
Step 2
(Optional) If you place a call, dial the number.

Cisco IP Phone 8800 Key Expansion Module

A key expansion module allows you to add extra line appearances or programmable buttons to your phone.
The programmable buttons can be set up as phone line buttons, speed-dial buttons, or phone feature buttons.
Simplified dialing is not supported on the expansion modules.
.
There are 3 expansion modules available:
• Cisco IP Phone 8800 Key Expansion Module—Single LCD screen module, 18 line keys, 2 pages,
• Cisco IP Phone 8851/8861 Key Expansion Module—Dual LCD screen module for audio phones, 14
• Cisco IP Phone 8865 Key Expansion Module—Dual LCD screen module for video phones, 14 line keys,
USB headset the preferred audio device.
the preferred audio device. The Bluetooth headset takes priority over wired headset, so audio is sent or
received from Bluetooth headset and there will be no audio on wired headset.
audio device.
configure with one or two column displays.
line keys, 2 pages, configure with one-column display only. If you are in Enhanced line mode, and you
receive a call on a key expansion line, then a Call Alert displays on the phone, and the Caller ID displays
on the expansion module line.
2 pages, configure with one-column display only. If you are in Enhanced line mode, and you receive a
call on a key expansion line, then a Call Alert displays on the phone, and the Caller ID displays on the
expansion module line.
Swap Headsets While on a Call
Cisco IP Phone 8800 Series User Guide
105