Sound Pressure Level; Vibration Level; Safety And Instructional Decals - Toro Groundsmaster 5910 Operator's Manual

Sound Pressure Level

CAUTION
Long-term exposure to noise while operating the
machine may cause some hearing loss.
Wear adequate hearing protection whenever you
operate the machine for an extended period of time.
Model 31598
This unit has a sound pressure level at the operator's ear of 92
dBA, which includes an Uncertainty Value (K) of 1 dBA.
Sound pressure level was determined according to the
procedures outlined in EN ISO 5395:2013.
Model 31599
This unit has a sound pressure level at the operator's ear of 84
dBA, which includes an Uncertainty Value (K) of 1 dBA.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Crushing hazard, hand—read the instructions before
servicing or performing maintenance.
1. Hydraulic oil
2. Read the Operator's Manual.
1. Do not step here.
93-6674
93-6686
93-6687
Sound pressure level was determined according to the
procedures outlined in EN ISO 5395:2013.

Vibration Level

Hand-Arm
Measured vibration level for right hand = 0.63 m/s
Measured vibration level for left hand = 0.65 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.58 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
1. Read the Operator's Manual—do not use starting fluid to
start the engine.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115 to 149 N·m (85 to 110
ft-lb).
5
2
2
2
2
2
93-7275
93-7818