Chart Page; Email Alerts Page - YASKAWA SI-EP3 Technical Manual

Single Collisions
Multiple Collisions
Deferred Collisions
Excessive Collisions
Frame Too Large
Note:
Cumulative counters are reset when the power supply is cycled.
◆

Chart Page

The Chart page can be used to monitor one signal from a predefined list.
List:
• Frequency Reference
• Output Frequency
• Output Current
• Motor Speed
• Torque Reference
• DC Bus Voltage
• Terminal Analog Input 1
• Terminal Analog Input 2
• Terminal Analog Input 3
◆

Email Alerts Page

The Email Alerts page allows the user to configure four Email Fault/Alarm conditions. When the condition is true,
one email will be sent to the provided email address. Another email will not be sent until the condition becomes
false and then true again. A 30-second timer prevents emails from being sent when conditions reoccur
immediately after being removed. The timer helps limit the amount of emails sent regarding the same intermittent
condition and helps to reduce network traffic by reducing emails about reoccurring errors.
Click "Save Email Settings" when you save the entered information into the option.
YASKAWA SIEP C730600 89E PROFINET Technical Manual
Name
Late Collisions
Figure 9.4 Chart Page View
Description
Cumulative number of single collisions.
Cumulative number of multiple collisions.
Cumulative number of late collisions.
Cumulative number of deferred collisions.
Cumulative number of excessive collisions.
Cumulative number of frames that exceed the maximum frame size.
9 Web Interface
47