YASKAWA SI-EP3 Technical Manual page 28

6 Related Drive Parameters
No.
Name
(Hex.)
F7-08 Subnet Mask 4
(03EC)
F7-09 Gateway Address 1
(03ED)
F7-10 Gateway Address 2
(03EE)
F7-11 Gateway Address 3
(03EF)
F7-12 Gateway Address 4
(03F)
F7-13 Address Mode at Startup
(03F1)
F7-14 Duplex Mode Selection
(03F2)
F7-15 Communication Speed
Selection
(03F3)
F7-23 - F7-27 Dynamic Output Assembly
Parameters 1 - 5
03FB - 03FF
F7-33 - F7-37 Dynamic Input Assembly
Parameters 1 - 5
(0375 - 0379)
H5-11 Communications ENTER
Function Selection
(043C)
No.
U6-80 - U6-83 Option IP Address 1 - 4
U6-84 - U6-87 Online Subnets 1 - 4
U6-88 - U6-91 Online Gateways 1 - 4
U6-92 Online Speed
28
Sets the static/fixed Subnet Mask. Sets the fourth most significant octet.
Note:
Set F7-01 to F7-12 when F7-13 = 0.
Sets the static/fixed Gateway address. Sets the most significant octet.
Note:
Set F7-01 to F7-12 when F7-13 = 0.
Sets the static/fixed Gateway address. Sets the second most significant octet.
Note:
Set F7-01 to F7-12 when F7-13 = 0.
Sets the static/fixed Gateway address. Sets the third most significant octet.
Note:
Set F7-01 to F7-12 when F7-13 = 0.
Sets the static/fixed Gateway address. Sets the fourth most significant octet.
Note:
Set F7-01 to F7-12 when F7-13 = 0.
Selects how the option address is set.
0 : Static
2 : DHCP
Note:
• Set F7-01 to F7-04 when F7-13 = 0. All IP Addresses (F7-01 to F7-04) must be unique.
• Set F7-01 to F7-12 when F7-13 = 0.
Selects duplex mode setting.
0 : Half/Half
1 : Auto/Auto
2 : Full/Full
3 : Half/Auto
4 : Half/Full
5 : Auto/Half
6 : Auto/Full
7 : Full/Half
8 : Full/Auto
Sets the communications speed.
10 : 10 Mbps (Port 1)/10 Mbps (Port 2)
100 : 100 Mbps (Port 1)/100 Mbps (Port 2)
101 : 10 Mbps (Port 1)/100 Mbps (Port 2)
102 : 100 Mbps (Port 1)/10 Mbps (Port 2)
Sets configurable outputs 1 - 5.
Sets configurable inputs 1 - 5.
Selects whether an Enter command is necessary to change parameter values via MEMOBUS/
Modbus communications.
0 : Parameter changes are activated when ENTER command is written
1 : Parameter changes are activated immediately without use of ENTER command
Table 6.1 Option Monitors
Name
Shows the currently available local IP Address.
• U6-80: 1st octet
• U6-81: 2nd octet
• U6-82: 3rd octet
• U6-83: 4th octet
Shows the currently available subnet mask.
• U6-84: 1st octet
• U6-85: 2nd octet
• U6-86: 3rd octet
• U6-87: 4th octet
Shows the currently available gateway address.
• U6-88: 1st octet
• U6-89: 2nd octet
• U6-90: 3rd octet
• U6-91: 4th octet
Shows CN1 Port 1 link speed currently available.
Description
Description
YASKAWA SIEP C730600 89E PROFINET Technical Manual
Default
(Range)
0
(0 - 255)
192
(0 - 255)
168
(0 - 255)
1
(0 - 255)
1
(0 - 255)
2
(0, 2)
1
(0 - 8)
10
(10 - 102)
0 (Hex.)
(0 - FFFF (Hex.))
0 (Hex.)
(0 - FFFF (Hex.))
0
(0, 1)
Range
0 - 255
0 - 255
0 - 255
10: 10 Mbps
100: 100 Mbps