Diagnostic And Alarms; Alarm Mechanism; Web Interface; Home Page - YASKAWA SI-EP3 Technical Manual

9 Web Interface

◆

Diagnostic and Alarms

SI-EP3 has mechanisms for sending alarms and saving diagnostics data to fault buffer. Alarm will be triggered if
the host or drive has faults in communication or operation. There are three types of faults:
Fault
Drive Fault
◆

Alarm Mechanism

When a fault or alarm situation occurs in the drive, the SI-EP3 adapter will send an alarm notification, which the
master station must acknowledge. Refer
ModuleIdentNumber
SubmoduleIdentNumber
UserStructureIdentifier
ChannelNumber
ChannelProperties
ChannelErrorType
9 Web Interface
The web server interface to the drive option through port 80 allows management of diagnostic information
through a standard web browser. The available pages include:

• Home Page

• PROFINET Page
• Network Page
• Chart Page
• Email Alerts Page
• Settings Page
Access the web server interface by typing the IP address of the SI-EP3 option in a web browser address.
Example: "http://192.168.1.20"
The SI-EP3 IP Address is available using drive keypad to access Option Monitors U6-80 to U6-83. Refer to page
Table 6.1 for more information.
◆
Home Page
The Home page shows the status of the drive and the I/O. It also shows identifying information about the drive
and the option.
44
API/Slot/Sub-slot
0x3A00 / 1 / 1
to Table 8.17
Table 8.17 Alarm Notification
Attribute
BlockHeader
AlarmType
API
SlotNumber
SubslotNumber
AlarmSpecifier
Channel Error Type
A fault declared in drive
for more information.
PROFINET specific alarm type
0x3A00 (PROFIdrive profile)
Slot number of the Drive Object (DO)
Sub-slot number of the sub-slot to which the diagnosis object is related
Module Ident number of the DO
0xFFFF
Diagnosis type
0x8000 (Channel Diagnosis Data)
0
0x0800 Diagnosis Appears
0x1000 Diagnosis Disappears
Error code of drive fault or drive alarm
YASKAWA SIEP C730600 89E PROFINET Technical Manual
Description
-