Add The Automatically Searched Online Ip Cameras; Manage Cameras For Poe Device - HIKVISION BCS-V-NVRXX02-4K Series User Manual

Step 5 Click Add to finish the adding of the IP camera.
Step 6 (Optional) Click Continue to Add to continue to add other IP cameras.

3.1.2 Add the Automatically Searched Online IP Cameras

Step 1 On the Camera Management interface, click the Online Device panel to expand the Online
Device interface.
Step 2 Select the automatically searched online device.
Step 3 Click Add to add the camera which has the same login password with the device.
If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the
camera management interface.

3.2 Manage Cameras for PoE Device

This chapter is only applicable for the following models: BCS-V-NVRxxxx-xP series device.
Purpose:
The PoE interfaces enables the device system to pass electrical power safely, along with data, on
Ethernet cabling to the connected PoE cameras. Supported PoE camera number varies with device
model
If you disable the PoE interface, you can also connect to the online network cameras. And the PoE
interface supports the Plug-and-Play function.
For example, for BCS-V-NVR0802-4K-8P, if you want to connect 6 network cameras via PoE
interfaces and 2 online cameras, you must disable 2 PoE interfaces in the Edit IP Camera menu.
Follow the steps to add network cameras for device supporting PoE function.
Network Video Recorder User Manual
Figure 3-2 Add IP Camera
39