Configure Alarm Output - HIKVISION DS-MP7608HN Series User Manual

Step 2 Select Alarm Input No.
Step 3 Enter Alarm Name.
Step 4 Select Trigger Level.
 High level: 6 to 36 VDC.
 Low level: 0 to 5 VDC.
In order to avoid error caused by voltage fluctuation, no alarm will be triggered by voltage
ranging from 5 VDC to 6 VDC.
Step 5 Click Set of Schedule to set arming schedule. For detailed steps, refer to 12.10
Configure Arming Schedule and Linkage Actions.
Step 6 Check Linkage Action and click Set of Linkage Action to set the linkage actions. For
detailed steps, refer to 12.10 Configure Arming Schedule and Linkage Actions.
Step 7 Click OK.

12.3 Configure Alarm Output

Purpose:
Configure the arming schedule, alarm duration time and alarm name for alarm output.
Step 1 Go to Menu > Other Settings > Alarm Out.
Mobile Network Video Recorder User Manual
Figure 12-2 Alarm Input Settings
60