Nilfisk-Advance Advance Retriever 2060 Service Manual page 95

WARNING!
DISCONNECT BATTERY BEFORE SERVICING.
1 Open the Left Side Main Broom Access Door. See Figure 1. Remove the (2) (A) Screws, the (4) (B) Screws and Nuts and the (2) (C) Screws and
Nuts.
2 Remove Plate (D) and Skirt (E) from the machine.
3 See Figure 2. Remove Screw (F) and Washer (G), loosen the (3) (H) Screws.
4 Disconnect and plug the (2) hydraulic hoses from the Main Broom Motor and slide the entire Drive Lug Assembly (I) off of the Main Broom Shaft
(J).
E
D
A
A
C
© 2000 Printed in USA, Nilfisk-Advance, Inc.
56419192 CASE DRAIN KIT
ITEM REF. NO.
56040713
1 56419193
2 56900051
3 56419194
4 56900341
INSTALLATION INSTRUCTIONS
FIGURE 1
B
For Retriever™ 2060G/P/DU
CONTENTS OF KIT
QTY DESCRIPTION
1 Instruction Sheet
1 End Cap, Motor
1 Connector, Extended O-Ring
1 Hose Assembly
1 Fitting, Tee #4
B
C
(page 1 of 3)
FIGURE 2
I
G
F
5/00 revised 11/00 Form No. 56040713
J
H