Nilfisk-Advance Advance Retriever 2060 Service Manual page 70

1 Open and prop up the hopper cover.
2 Remove the "Dummy" plug and ground wire from the extra Connector (A) and discard.
3 Install all items as shown, Cord Assembly (3) should be routed through the (2) Cord Clamps (5) and plugged into Connector (A).
4 Plug the Black wire from Cord Assembly (3) onto the right side of the Temperature Switch (1). The White wire from Cord Assembly (3) connects
to the middle terminal of the Temperature Switch (1).
5 Close and latch the hopper cover.
© 1999 Nilfisk-Advance, Inc. Printed in USA
56418420 TEMPERATURE SWITCH KIT
For Advance 2060 / Nilfisk SR 1800
ITEM PART NO.
56040691
1 56418405
2 56418419
3 56418379
4 56418440
5 56323260
6 56009012
7 56002043
8 56009009
9 56009011
INSTALLATION INSTRUCTIONS
A
6
3
9
CONTENTS OF KIT
QTY DESCRIPTION
1 Instruction Sheet
1 Switch, Temp.
1 Wire Assembly
1 Cord Assembly 18/2
1 Bracket
2 Clamp, Cord
3 Scr, Hex Thd Form 10-24 x .38
2 Scr, Pan Phil 10-24 x .38
2 Nut, Hex Machine 10-24
2 Wsh, Int Shprf #10
6
5
5
6
1
8
2
7
4
4/99 Form No. 56040691