Nilfisk-Advance Advance Retriever 2060 Service Manual page 116

4 See Figure 2. Install Bracket (9) and (1) Switch (7) in this location as shown using Hardware Items (13), (16) & two of the item (14) Screws.
NOTE: Make sure the switch actuator is centered from side-to-side in the 1.50" (3.81cm) hole and that the switch actuator IS NOT up against the
chassis wall so as to actuate(close) it.
FIGURE 2
FRONT
14
7
9
16
13
(page 2 of 8) 3/01 Form No. 56040742