Nilfisk-Advance Advance Retriever 2060 Service Manual page 5

________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OTHER MANUALS AVAILABLE FOR THE RETRIEVER™ 2060
The following manuals are available from the Nilfisk-Advance Literature Service Department:
• Retriever™ 2060 Parts List - Form Number 56042354
• Retriever™ 2060 Operation Manual - Form Number 56041432
• Ford Engine Service Manual - P.N. PPD 194-294
• Ford Maintenance & Operator Manual - P.N. 194-263
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OTHER MANUALS AVAILABLE FOR THE SR 1800
The following manuals are available from the Nilfisk-Advance Literature Service Department:
• SR 1800 Parts List - Form Number 56042362
• SR 1800 Operation Manuals - Form Number 56041440 (Danish, Norwegian, Swedish, Finnish)
• Ford Engine Service Manual - P.N. PPD 194-294
• Ford Maintenance & Operator Manual - P.N. 194-263
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
TRANSPORTING THE MACHINE
CAUTION!
Before transporting the machine on an open truck or trailer, make sure that . . .
• All access doors and covers are secured.
• The machine parking brake is set.
• The machine is tied down securely.
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
TOWING OR PUSHING A DISABLED MACHINE
The machine's drive propelling pump is manufactured with an
adjustable tow valve. This valve prevents damage to the hydraulic
system when the machine is being towed/pushed short distances
without use of the engine.
To access the valve open the left front door panel and locate the
valve as shown on top front of the propelling pump. Use a pliers
or a 5/16" (8 mm) open end wrench to turn the valve 90 degrees,
this disengages the hydrostatic lock between the motor and
pump.
CAUTION!
The hydraulic propelling pump can be damaged if the ma-
chine is towed with the valve in the normal working position
(A).
Reference the illustrations below for the normal working setting (A)
(vertical) and the free wheeling towing setting (B) (horizontal).
Note: If the tow valve is left in free wheeling (B) (horizontal) position
the propelling pump can't drive the machine FWD or REV. No
damage will result, just re-set valve to the normal working setting
(A) (vertical). NOTE: Tow or push machine no faster than a normal
walking pace (2-3 mph - 3-5 km/h) and for short distances only. If
the machine is to be moved long distances the drive wheel needs
to be raised off the floor and placed on a suitable transport dolly.
56041441 (English, German, French, Nederlands)
56041442 (Spanish, Portuguese, Italian, Greek)
A
FORM NO. 56043051 / Retriever
GENERAL INFORMATION
B
™ 2060 - 3