Remotely Controlling A Performance Multiframe System - Agilent Technologies 16900 Series Installation Manual

Remotely Controlling a Performance Multiframe System

If you want to control the performance multiframe system remotely, there
is only one option:
• Use one of the remote window utilities to remotely control the
16900 Series Logic Analysis Systems Installation Guide
application on one of the frames. If it does, then simply exit the
application. If it does not, then fix the problem on that frame first.
b Verify that the firewalls on all frames are set up properly with the
proper exceptions (see
defaults" on page 109).
c On the performance PC, do not block outbound traffic to port 16900.
d The Refresh button in the Select System to Use dialog should show
the status of the multiframe logic analysis system as "Available".
e Validate that you have properly configured the network setup on each
of the systems. All systems must be able to communicate with each
other over the multiframe cable and over the LAN.
performance PC. Choose from Remote Desktop, RealVNC, or NetOp. You
will need to set up this service on your performance PC and your local
PC.
Setting Up Multiframe Configurations
"To restore the logic analysis system firewall
5
97