2
Installing Logic Analyzer Cards and Probes
16911A/10A Logic Analyzer (2-card module)
Use two 2 x 15 cables and two 2 x 50 cables (in the accessory pouch) to
connect the modules.
Turn off the mainframe power before removing, replacing, or installing modules. For
N O T E
instructions on installing modules into the logic analysis system frame, refer to
You can combine the same model numbers only (16910A in a 2-card set or 16911A in a
N O T E
2-card set). The combined set will default to the lowest state speed and memory depth in
the set.
54
16900 Series Logic Analysis Systems Installation Guide
page
26.