16911A/10A Logic Analyzer (3-card module)
Use three 2 x 15 cables and four 2 x 50 cables (in the accessory pouch) to
connect the modules.
Turn off the mainframe power before removing, replacing, or installing modules. For
N O T E
instructions on installing modules into the logic analysis system frame, refer to
You can combine the same model numbers only (16910A in a 3-card set or 16911A in a
N O T E
3-card set). The combined set will default to the lowest state speed and memory depth in
the set.
16900 Series Logic Analysis Systems Installation Guide
Installing Logic Analyzer Cards and Probes
2
page
26.
55