Agilent Technologies 16900 Series Installation Manual page 41

3 Now, slide the next card about 1/3 of the way into its slot, so that it is
4 Attach the flex cables to the top side of the lower card:
5 Repeat steps 2- 4 for the remaining cards.
16900 Series Logic Analysis Systems Installation Guide
aligned with the lower card.
a Flip up the connector actuator with your thumb or index finder. Do
not use any type of tool to open the actuator.
b Place the flex cable into the connector, exposed conductive traces
towards the card, so that the flex cable ears are secured by the
connector guides.
Be careful not to bend the flex cables any more than is necessary to
fit between the card connectors.
c Close the connector actuator.
d Repeat for the opposite top- side flex cable and connector.
Installing Logic Analyzer Cards and Probes
2
41