Agilent Technologies 16900 Series Installation Manual page 135

2 After a few seconds, the Logic Analysis system automatically starts with
16900 Series Logic Analysis Systems Installation Guide
the option selected in the Windows Boot Manager. Select the Agilent
Recovery system option in the Windows Boot Manager screen using the
arrow keys and then press Enter.
The recovery process starts preparing the system for recovery and
displays the following screen with options to choose. You can enter:
• 1 to run Check Disk on the Logic Analysis system's hard disk drive.
If the recovery process encounters any problems while running Check
Disk, it reports these problems else it returns to the Agilent Recovery
system prompt on completion of Check Disk.
• 2 to restore your Logic Analysis system software back to its original
state in which it was shipped.
• 3 to view a document that provides information on the recovery
process.
• 4 to repair the Logic Analysis system hard disk drive.
• 5 to exit the recovery process and restart the Logic Analysis system
in the normal mode.
7
Solving Problems
135