Agilent Technologies 16900 Series Installation Manual page 25

2 Insert the module sleeve into the front of the module panel and screw
3 Screw the module screw into the sleeve.
Thumb
screw
The 16900A/16902A logic analysis system comes with a set of 6
replacement thumb screws (16900- 68713), and the 16903A logic analysis
system comes with a set of 2 replacement thumb screws (16903- 68713).
16900 Series Logic Analysis Systems Installation Guide
the nut onto it.
Module
Retaining
sleeve
ring
Installing Logic Analyzer Cards and Probes
Hex nut
Module
screw
25
2