If Expected Windows Welcome Questions Do Not Appear - Agilent Technologies 16900 Series Installation Manual

4
First-Time Set Up
Table 5 Answering Windows Welcome Questions (continued)
How will this computer
connect to the Internet?
Setting up a high-speed
connection?
(If LAN connected) Will this
computer connect to the
Internet directly, or through a
network?
(If LAN is not connected)
Windows unable to
determine LAN connectivity.
Ready to register with
Microsoft
Who will use this computer?

If expected Windows Welcome questions do not appear

During first- time power- up, depending on the configuration of your
network, some of the Windows Welcome questions that should appear, like
"Is this computer in a domain?", may not appear.
If this occurs, you need to change the logic analysis system's network
setup (after the first- time power up) using the normal Windows XP
specific procedures (see
80
Standalone (No LAN)
N/A
N/A
N/A
N/A
The legacy 16900 series of Logic Analysis systems have Windows XP already enabled to
run.
This registration is to allow Microsoft to contact you.
For All: Entering names here lets multiple users use the logic analyzer with administrator
permissions. By default their passwords will be blank.
"To change network settings"
Workgroup
N/A
N/A
Choose "Yes, through a
network"
(Agilent does not support
connecting to the internet
through a modem directly
connected to the logic
analyzer.)
You are told to set up LAN
later.
16900 Series Logic Analysis Systems Installation Guide
Domain
Choose the appropriate
answer.
Enter either the fixed IP/DNS
assigned by your network
administrator or select
"Obtain Automatically".
N/A
N/A
on page 104).