Setting Up Hardware; To Connect The Mouse, Keyboard, And Monitor - Agilent Technologies 16900 Series Installation Manual

1

Setting Up Hardware

To connect the mouse, keyboard, and monitor

The 16900A logic analysis system must have the system mouse and
keyboard connected for the system to boot up properly. Once enabled on
the LAN, the system can be operated remotely without a keyboard or
mouse. Use of a monitor is optional for the 16901A, 16902A, 16902B, and
16903A.
(The following rear panel figures are representative; yours may look
different.)
1 Connect the provided PS/2 mouse and keyboard provided to the back of
2 Connect a monitor to the back of the 16900A. A second monitor on the
14
frame.
16901A, 16902A, 16902B, or 16903A is optional.
16900 Series Logic Analysis Systems Installation Guide