16720A Pattern Generator (4-Card Module) - Agilent Technologies 16900 Series Installation Manual

3
Installing Pattern Generator Cards

16720A Pattern Generator (4-card module)

Turn off the mainframe power before removing, replacing, or installing modules. For
N O T E
instructions on installing modules into the logic analysis system frame, refer to
1 Carefully slide the 4 cards half way into the mainframe slots.
2 Use four 2 x 10 cables to connect the modules. Cable the bottom
3 Gently slide the cabled assembly fully into the frame and tighten the
74
Expander Card to the Master Card first. Then cable the upper two
Expander Cards to the Master Card.
thumb screws.
2x10 Cable
Expander
Expander
Master
Expander
16900 Series Logic Analysis Systems Installation Guide
page 26.