First-Time Set Up On 16900 Series Systems With Windows 7 Installation - Agilent Technologies 16900 Series Installation Manual

First-Time Set Up On 16900 Series Systems with Windows 7
Installation
The first time you turn on a 16900 series logic analysis system that is
shipped with Windows 7 installation, you are automatically logged on to
the system using the Administrator account and the Windows 7 desktop is
displayed.
Unlike legacy 16900 series logic analysis systems, the Windows Welcome
questions are not displayed for setting logic analyzer configurations on
these new 16900 systems the first time you turn these on. However, once
you are logged on to the system, you must set the following logic analyzer
configurations based on how you want to use your logic analysis system.
You use the standard Windows 7 procedures to set these configurations.
Table 6
Configuration Task
Protect your instrument's PC
Specify computer name
Specify the administrator
password
Specify the domain name (if
applicable)
Enter your domain settings.
Configure connectivity to the
Internet
16900 Series Logic Analysis Systems Installation Guide
Logic Analyzer Configurations on a 16900 Series Logic Analysis system with
Windows 7 Installation
Standalone (No LAN)
N/A
If your organization has a standard naming scheme, use that scheme. Otherwise,
choose a descriptive name (less than 15 characters)
Agilent recommends entering an administrator password for administrator accounts.
See page 83 for actions that require administrator accounts.
No
(Is given WORKGROUP
membership)
N/A
N/A
Logic Analyzer Usage
Workgroup
Turn on Automatic
Updates
No
(Is given WORKGROUP
membership)
N/A
N/A
First-Time Set Up
Domain
Turn on Automatic Updates
Yes
Enter the domain name the
logic analyzer will log onto.
Enter the name/password of
the user who can add the
logic analyzer to the domain.
Choose the appropriate
Internet connectivity.
4
81