16951/50B Logic Analyzer (1-card module)
Each card shipped stand- alone has the 2 x 15 cable connected in the
single- card module configuration. The 2 x 50 cables in the accessory
pouch are not used. A single- card module can be installed in any available
slot.
Turn off the mainframe power before removing, replacing, or installing modules. For
N O T E
instructions on installing modules into the logic analysis system frame, refer to
The order of pods on the card's rear panel is:
In a multi- card set, pods are indexed starting with the master card, then
with the expander cards from the bottom up.
16900 Series Logic Analysis Systems Installation Guide
Pod 4
Pod 3
Installing Logic Analyzer Cards and Probes
Pod 2
2
page
26.
Pod 1
43