To Replace The Cpu Battery - Agilent Technologies 16900 Series Installation Manual

6
Using and Updating the Logic Analysis System

To replace the CPU battery

1 Power down the system and disconnect the power cable before replacing
2 Access the motherboard using the steps described in
3 Using a 1/8 inch flat- blade screwdriver, gently pry the battery from the
4 Insert a new battery (CR2032 3V lithium) into the battery receptacle.
5 Put the frame back together by reversing the "access the motherboard"
124
the CPU battery.
interface cards (16900A, 16902A, 16902B, or 16903A)"
"To install interface cards (16901A)"
battery receptacle.
steps used earlier.
on page 121.
16900 Series Logic Analysis Systems Installation Guide
"To install
on page 115 or