Agilent Technologies 16900 Series Installation Manual page 111

6
Using and Updating the Logic Analysis System
If your 16900 Logic Analysis system has 5.20 or later version of Logic
Analyzer software and Windows 7 installation, then restore the firewall
defaults by performing the following steps:
1 From the Windows Start menu, choose Start>Control Panel.
2 Click the Windows Firewall link.
3 Click Restore defaults in the left pane of the window.
4 Again click Restore defaults.
5 Uninstall and then reinstall the Logic Analyzer software from
www.agilent.com/find/la- sw- download.
The logic analysis system firewall defaults enable the following exceptions:
• Agilent Logic Analysis Application program.
• Agilent Logic Analysis Service program.
• File and Printer Sharing.
• Microsoft RPC Endport Mapper TCP port.
• Remote Desktop service.
• Web Server (HTTP) port.
The logic analysis system firewall defaults also enable the following ICMP
(Internet Control Message Protocol) settings:
• Allow incoming echo request.
• Allow outgoing destination unreachable.
• Allow outgoing time exceeded.
Note that there are separate Windows Firewall profiles: Domain for when the computer has
N O T E
domain membership, and Standard for when the computer has workgroup membership.
When you restore the logic analysis system firewall defaults, the defaults for both profiles
are restored.
16900 Series Logic Analysis Systems Installation Guide 111