To Clean The Instrument; Safety Symbols - Agilent Technologies 16900 Series Installation Manual

A
Safety Notices
• Service instructions are for trained service personnel. To avoid
• Do not install substitute parts or perform any unauthorized
• Capacitors inside the instrument may retain a charge even if the
• Do not operate the instrument in the presence of flammable gasses or
• Do not use the instrument in a manner not specified by the
• To optimize your comfort and productivity, it is important that you set
• Position equipment so that it is not difficult to disconnect the power

To clean the instrument

If the instrument requires cleaning:
1 Remove power from the instrument.
2 Clean the external surfaces of the instrument with a soft cloth
3 Make sure that the instrument is completely dry before reconnecting it

Safety Symbols

Instruction manual symbol: the product is marked with this symbol when
!
it is necessary for you to refer to the instruction manual in order to
protect against damage to the product.
Hazardous voltage symbol.
140
dangerous electric shock, do not perform any service unless qualified to
do so. Do not attempt internal service or adjustment unless another
person, capable of rendering first aid and resuscitation, is present.
modification to the instrument.
instrument is disconnected from its source of supply.
fumes. Operation of any electrical instrument in such an environment
constitutes a definite safety hazard.
manufacturer.
up your work area correctly and use your equipment properly. Refer to
http://www.agilent.com/quality/Working_In_Comfort.pdf
use recommendations.
cord.
dampened with a mixture of mild detergent and water.
to a power source.
16900 Series Logic Analysis Systems Installation Guide
for set- up and