16720A Pattern Generator (5-card module)
Turn off the mainframe power before removing, replacing, or installing modules. For
N O T E
instructions on installing modules into the logic analysis system frame, refer to
1 Carefully slide the 4 cards half way into the mainframe slots.
2 Use five 2 x 10 cables to connect the modules. Cable the bottom two
3 Gently slide the cabled assembly fully into the frame and tighten the
16900 Series Logic Analysis Systems Installation Guide
Expander Cards to the Master Card first. Then cable the upper two
Expanders to the Master Card.
thumb screws.
Installing Pattern Generator Cards
2x10 Cable
Expander
Expander
Master
Expander
Expander
3
page
26.
75