Sync Function - Aspen Avionics Evolution Backup Display EFD1000 Pilot's Manual

Figure 2-4
Bottom and Top Knobs and
Corresponding Fields
091-00027-001 REV A
091-00027-001 Rev A EBD Pilots Guide V&H .indb 7
Figure 2-4a
Evolution Back up Display Basic, Portrait
with call outs
Evolution Backup Display Pilot's Guide

2.2.1.3. SYNC Function

1. Press the Knob until its state shows the value you want to set in
magenta.
2. Press and hold the Knob for approximately one (1) second to SYNC
the field's value according to the rules shown in Table 2-2 and
Figure 2-4.
3. After 10 seconds of inaction, the knob reverts to its home state (IAS
or HDG), and the labels and field turn to cyan (inactive).
Top Knob
SYNC Action
ALT
Set to 29.92 in Hg or 1013 mB.
BARO
Set to the current heading.
HDG
Top Knob -Current State default setting: HDG
Cyan indicates field is inactive.
Set to the current indicated airspeed.
IAS
Bottom Knob - Current State default setting: IAS
Cyan indicates field is inactive.
Table 2-2
Bottom and Top Knob SYNC Description
Page 2-7
8/27/14 8:51 AM