Aspen Avionics Evolution Backup Display EFD1000 Pilot's Manual page 116

Page 5-16
091-00027-001 Rev A EBD Pilots Guide V&H .indb 16
On aircraft with flaps, setting the upper and lower thresholds of the white and/or yellow
bands to the same value disables the applicable band. When disabled, the band does
not display.
When using the Vspeed textual markers, the pilot must first ENABLE the display of
the markers and then set values for each Vspeed. The value range for Vspeed textual
markers is 0 – 450 or LOCKED. The default setting is 0 unless previously set to another
value. When the value is 0, the Vspeed is individually disabled, and the marker is not
Figure 5-24
shown on the Airspeed Tape. Once the values are set, the pilot can choose to disable all
VSPEEDS A
the Vspeed textual markers to declutter the Airspeed Tape.
Display or Hide the Vspeed Textual Markers on the Airspeed Tape
1.
2.
3.
4.
Figure 5-25
Editing VSPEEDS
5.
Figure 5-26
VSPEEDS Disabled
Evolution Backup Display Pilot's Guide
Press the MENU Button.
Rotate the Top Knob to the VSPEEDS A Menu page (Figure 5-24).
Press the VSPEEDS Menu Key.
The Menu label turns magenta, and the EDIT VALUE label displays above the
Top Knob (Figure 5-25).
Rotate the Top Knob to select ENABLE or DISABLE (Figure 5-26).
ENABLE will display the Vspeeds on the Airspeed Tape and DISABLE will hide
the Vspeeds to declutter the Airspeed Tape
Press the MENU Button to exit.
091-00027-001 REV A
8/27/14 8:51 AM