Scanning With The Film Mount For 35-Mm Film - Microtek ScanMaker IIG User Manual

C. Scanning with the film mounts for 35-mm film
Follow this procedure to scan 35-mm film.
Place the standard film holder on an even surface, then open
1
the film holder.
2 Do one of the following:
• To scan unmounted slides
Place the slide in the Microtek 35-mm slide mount, then place
the mounted slide in film mount #3 (see p. 2-43). Secure the
film under the clips of the film mount to lock the slide in.
Microtek 35 mm
Slide mount
Film mount #3
Operating the scanner...
Film
Mounted slide
Hardware Installation 2-51