The Quick Panel Utility - Microtek ScanMaker IIG User Manual

The Quick Panel Utility

Appendix D
The Quick Panel is a utility included with ScanWizard for Windows that
performs common scanning tasks. Among other things, the Quick Panel can
scan an image or text document and send it to your printer, fax it through your
fax software to a designated destination, or save the document to a designated
directory in your hard drive.
This section covers the following information:
• Starting up the Quick Panel
• Setting the parameters for the Quick Panel
• Using the Quick Panel's functions
Installation
The Quick Panel is automatically installed when you install ScanWizard for
Windows, and no further modifications are needed.
Starting up
Before starting up the Quick Panel, make sure that:
• The scanner is connected and has been turned on for at least two minutes to
give time for the scanner to warm up.
• The software version of your scanner software is ScanWizard 2.2 or later.
• The printer is connected to an available output port and is turned on (if you
wish to use the Quick Panel's Copy function).
• The fax adapter card for the PC and the driver that came with your PC fax
have been tested for trouble-free fax transmission (if you wish to use the
Quick Panel's Fax function).
For Windows 95: To start up the Quick Panel, click on the Start button to
select Programs, Microtek ScanWizard for Windows 95, and Quick Panel.
For Windows 3.1x: To start up the Quick Panel, go to the ScanWizard group
window, and double click on the Quick Panel icon.
Double-click on the
Quick Panel icon to
start up the utility