Filters; Auto; Tints; Color Correction / Dcr - Microtek ScanMaker IIG User Manual

Filters

The Filters tool lets you apply or create special effects to your
images. The filters include Blur, Blur More, Sharpen, Sharpen
More, Edge Enhancement, and Emboss. Below is an example.
Auto (Automatic Contrast Control)
This tool optimizes the contrast of scanned images by
adjusting the gamma and shadow/highlight values. This is one
of the simplest tools to use, requiring only the click of a
button. It can have the most dramatic effect on your image,
and its results are immediately visible.
For Color Images only

Tints

This tool lets you adjust the hue and saturation of an image.
The hue of an image is what distinguishes a color from
another (whether it is red, green, blue, etc.), while saturation
refers to the intensity of the color (more red, more green).

Color Correction / DCR

This tool applies a generic color profile to your images to
give it accurate, lifelike color. If you have Microtek's DCR
color calibration and correction system installed, the Color
Correction button will override the generic color profile
embedded in your scanning software and apply DCR instead
to the image.
1-16 Microtek User's Guide for Windows
Original
Original
Blur
Auto applied