Requirements; Voltage - Microtek ScanMaker IIG User Manual

Requirements

• IBM-PC 486, Pentiums, or compatibles with a CD-ROM drive
• Microsoft Windows 95 or Windows 3.1
• 8MB RAM; 16MB RAM for full version of Photoshop
• At least 40MB hard disk with 15MB free
• VGA Color display or better

Voltage

The voltage of the scanner is indicated at the back of the scanner
near the power switch.
The input voltage of the ScanMaker 35t Plus is preset in the
factory from 100V to 240V. Don't plug in the scanner until all of
the other cables have been connected first.
Model No.:PTS-1950
AC 100-240V~
1.0-0.5A
50-60 Hz
Before You Begin...
6
Hardware Installation 2-21